Specific Process Knowledge/Polymer Processing/Coating/Inkjet Printer: Difference between revisions
| Line 7: | Line 7: | ||
[[File:Inkjet printer.jpg|400px|right|Inkjet printer is located in PolyFabLab, building 347.]]The inkjet printer is an Autodrop Gantry II printing system bought in 2020 and installed in PolyFabLab in 2025. It is a modular XYZ positioning platform for contact-less, piezo-driven inkjet dispensing. It drives interchangeable dispenser heads, Autopipettes, or piezo valves rather than a single fixed printhead, and is intended for precision deposition of inks, polymers, and other functional fluids on chips, wafers, and other flat substrates — for process development, prototyping, and small-batch work rather than high-throughput production. | [[File:Inkjet printer.jpg|400px|right|Inkjet printer is located in PolyFabLab, building 347.]]The inkjet printer is an Autodrop Gantry II printing system bought in 2020 and installed in PolyFabLab in 2025. It is a modular XYZ positioning platform for contact-less, piezo-driven inkjet dispensing. It drives interchangeable dispenser heads, Autopipettes, or piezo valves rather than a single fixed printhead, and is intended for precision deposition of inks, polymers, and other functional fluids on chips, wafers, and other flat substrates — for process development, prototyping, and small-batch work rather than high-throughput production. | ||
The user manual and contact information for the inkjet printer can be found on LabManager [https://labmanager.dtu.dk/function.php?module=Machine&view=view&page_id=169] - | The user manual and contact information for the inkjet printer can be found on LabManager [https://labmanager.dtu.dk/function.php?module=Machine&view=view&page_id=169 LabManager] - '''requires login''' | ||
Revision as of 11:29, 18 September 2026
The content on this page, including all images and pictures, was created by DTU Nanolab staff, unless otherwise stated.
Feedback on this page: click here
Inkjet printer
The inkjet printer is an Autodrop Gantry II printing system bought in 2020 and installed in PolyFabLab in 2025. It is a modular XYZ positioning platform for contact-less, piezo-driven inkjet dispensing. It drives interchangeable dispenser heads, Autopipettes, or piezo valves rather than a single fixed printhead, and is intended for precision deposition of inks, polymers, and other functional fluids on chips, wafers, and other flat substrates — for process development, prototyping, and small-batch work rather than high-throughput production.
The user manual and contact information for the inkjet printer can be found on LabManager LabManager - requires login