Jump to content

Specific Process Knowledge/Lithography/EBeamLithography/JBX9500Manual: Difference between revisions

← Older edit
VisualWikitext
Mmat (talk | contribs)
NLAB-Employees-701, NLAB-LabmanagerAllUsers, Administrators
1,954 edits
mNo edit summary
Thope (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab347-labadviser-users-35231
2,179 edits
 
Line 927: Line 927:


HEIMAP is a sub program that measures height of the substrate with an IR laser. The incidence angle of the laser is 73 degrees.
HEIMAP is a sub program that measures height of the substrate with an IR laser. The incidence angle of the laser is 73 degrees.
'''It has been observed by one user, that HEIMAP does not work on a SOI wafer coated with a thin layer of e-beam resist and ESPACER''', most liekly due to a Fabry-Perot effect in the substrate. The problem was solved by using thermally evaporated Al instead. The refractive index of Al (at 800 nm) is approximately 2, the refractive index of ESPACER approximately 1.25.


{| cellpadding="2" style="border: 2px solid darkgray;" align="right"
{| cellpadding="2" style="border: 2px solid darkgray;" align="right"
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Lithography/EBeamLithography/JBX9500Manual"