LabAdviser/Introduction to LabManager

Feedback to this page: click here

New Features in LabManager

Date	Feature	link for more
dummy	16 Jan. 2015

Booking in LM

Find the Lab Manager booking rules here: Booking rules

LabAdviser/Introduction to LabManager/Booking Guide|Booking Guide

Logbooks in LM

Presentation on how to use the Process Logbooks in LM: Howto - Process logbooks in LM

Equipment Cross Contamination

Presentation on how to use Cross Contamination in LM: Howto - Cross Contamination in LM

• Cross Contamination - Process Flow
• 
  (from presentation Aug. 2014)

Equipment with LabManager Lock

Some equipment is equipped with a "LabManager Lock". This is an electronic switch that allows use of the tool only if you are logged in on LabManager.

• RED means: No-one is logged in. You are not able to use the equipment. Some feature on the tool is disabled so that you cannot use it. What is disabled differs from equipment to equipment. It can be the monitor that does not turn on, the furnace will not load or the shutter not turn on.
• YELLOW means: The equipment is under service. You are under no circumstances allowed to use the equipment.
• GREEN means: Someone is logged in. You are able to use the equipment, but make sure it is you that is logged in.

Orderlines in LM

When you use the cleanroom, use equipment or buy wafers your project or department will be charged according to the DTU Nanolab pricebook. You can review the charges if you click the "Orderlines" in the LabManager main menu. Note for the cost indicated is the cost for commercial activities. The actual cost charged depends on what kind of project your are working on. See the DTU Nanolab pricebook for details. You have the possibility to correct the orderline e.g. if it is charged on the wrong project or you had forgot to log out of a tool. Click on the [Change] field to the right of the line. A new line opens where you can edit the amount, project, text or date. If you edit the amount the change has to be acknowledged by Nanolab first.

Purchase of wafers

You need to purchase the wafers that you use in the cleanroom. This is also done in LabManager.

Click on the [≡] to the top left on the page to bring out the full LabManager menu. Find the Shop sub-menu and select Wafers.

A list with wafers available for purchase opens.

• Find the type of wafer you want.
• Make sure all specifications are as wished.
• Check the stock and see if the are any comments
• Click the [Buy] button if everything is OK and
• fill out the form.

Data transfer from equipment

How to transfer data from some equipment in the clean room: Manual for remote.dtu.dk

General info

You can find important information about the clean room in LabManager here: Documents with General Information

As of September 2022 it contains:

 Safety Documents:
   Approved Chemicals
   Temporarily Approved Chemicals
   Procedure for safety approval of new and moved equipment (SI3.0.1.2)
   Emergency Plan (SI 3.2.1)
   Alarmsystemet (SI 3.2.3)
   Ansvarlige (SI 3.2.4)
   Procedure for approval of new chemical (SI 3.3.6)
   Safety policy on DTU Nanolab (SI 3.4.2)
   Generelle regler for arbejde i DTU Nanolabs renrum (SI 3.5.1.1)
   Rules for working in DTU Nanolab's cleanroom (SI 3.5.1.2)
   Rules for working with Chemistry at DTU Nanolab building 346/347 (SI 3.5.2.2)

 Cleanroom Documents:
   Booking Rules have moved to the individual equipment under Equipment->Info page
   Cleanroom Map
   Manual for remote.dtu.dk (data transfer)

LI Link

https://labintra.nanolab.dtu.dk/index.php?title=Main_Page/Application_Notes/CAPA#TEST_LA2