Jump to content

Specific Process Knowledge/Lithography/EBeamLithography/FirstEBL: Difference between revisions

← Older editNewer edit →
VisualWikitext
Thope (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab347-labadviser-users-35231
2,178 edits
No edit summary
Thope (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab347-labadviser-users-35231
2,178 edits
Line 244: Line 244:


*Login to the support PC using your DTU credentials.
*Login to the support PC using your DTU credentials.
*Open “FFFTP”
*Open the “FFFTP setup” folder found on the desktop
*Click “New connection” and fill the fields as shown in the "Host Setting" window below
*Double click "FFFTP setup.reg" and accept the warnings
*Password is "Jeoleb"
*Initial Local Folder should be your own M-drive or similar
 


{| style="border: none; border-spacing: 0; margin: 1em auto; text-align: center;"
{| style="border: none; border-spacing: 0; margin: 1em auto; text-align: center;"
Line 258: Line 255:
|}
|}


 
Now FFFTP is setup with access to the JEOL 9500 computer on your Windows account. Open FFFTPNow you can click "Connect" in FFFTP and it opens with your drive on the left side and the JEOL9500 PC on the right hand side. You can now drag and drop files between the two folders. The SDF and JDF files go in the same folder, the pattern data however goes into a separate folder. The correct folders are:
Now you can click "Connect" in FFFTP and it opens with your drive on the left side and the JEOL9500 PC on the right hand side. You can now drag and drop files between the two folders. The SDF and JDF files go in the same folder, the pattern data however goes into a separate folder. The correct folders are:


*SDF/JDF: /home/eb0/jeoleb/job/danchip
*SDF/JDF: /home/eb0/jeoleb/job/danchip
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Lithography/EBeamLithography/FirstEBL"