Specific Process Knowledge/Lithography/EBeamLithography/BEAMER: Difference between revisions

← Older edit Newer edit →

VisualWikitext

@@ Line 1: / Line 1: @@
 '''Feedback to this page''': '''[mailto:e-beam@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php?title=Specific_Process_Knowledge/Lithography click here]'''
-=<span style="background:#FF2800">THIS PAGE IS UNDER CONSTRUCTION</span>[[image:Under_construction.png|250px]]=
 =Beamer guide=
-All users of the JEOL 9500 system must have their pattern converted to the JEOL52 V3.0 (V30) format,  this conversion is done using Beamer. Beamer can however do many other operations than this simple format conversion. In this section we will describe some of the most frequently used nodes and also provide a few node setups for specialized tasks.
+AAll users of the JEOL 9500 system must have their pattern converted to the JEOL52 V3.0 (V30) format,  this conversion is done using Beamer. Beamer can however do many other operations than this simple format conversion. Proper pattern processen in Beamer can significantly enhance the quality of the lithographical result from an EBL process. In this section we will describe some of the most frequently used nodes and also provide a few node setups for specialized tasks.
 ==Node descriptions==
-The main nodes of Beamer and their primary use are listed in the table below. Further details of the most frequently used nodes are also provided in the sections below.
+A quick overview of the Beamer nodes is provided in the table below. The main nodes are described in further detail below.
 {| class="wikitable"