LabAdviser/Courses/TPT Thin Film: Difference between revisions

Revision as of 07:57, 19 June 2023

Feedback to this page: click here

This page is written by DTU Nanolab internal

Thin Film TPT

DTU Nanolab offers a Tool Package Training (TPT) course in thin film growth and deposition techniques.

Users that have to use any thin film growth and/or deposition tools in the cleanroom will have to sign up for the lectures, before they apply for a training (i.e. it is possible to get a training and then attend the lectures afterwards).

Thin film tool package training (TPT)
Schedule	Theoretical part 1^st lecture (2 - 2½ hours): Introduction to thin films Before you start - Material properties to consider Overview of thin film techniques at DTU Nanolab Equipment overview in LabAdviser Thin film techniques – 1^st part: Thermal oxidation Sign up for the next lecture here: https://nanolab.doodle.com/poll/k4pdm2n4bpseww5e. No lecture will be held in July. A date for a lecture in August has not been decided yet. If you want to attend the Thin Film TPT course this month, then send an email to thinfilm@nanolab.dtu.dk and let us know, when you are available. Please note that it is possible to apply for a training before you attend the lecture, if you send an email to training@nanolab.dtu.dk. 2^nd lecture (3 - 3½ hours): Thin film techniques – 2^nd part: PVD (physical vapour deposition) E-beam evaporation Thermal evaporation Sputtering CVD (chemical vapour depostion) LPCVD (low pressure chemical vapour deposition) PECVD (plasma enhanced chemical vapour deposition) ALD (atomic layer deposition) Sign up for the next lecture here: https://nanolab.doodle.com/poll/4r3ydwzzbrdepgpf No lecture will be held in July. A date for a lecture in August has not been decided yet. If you want to attend the Thin Film TPT course this month, then send an email to thinfilm@nanolab.dtu.dk and let us know, when you are available. Please note that it is possible to apply for a training before you attend the lecture, if you send an email to training@nanolab.dtu.dk. Practical part None
Location	Theoretical part The location of the lectures will be notified in the doodles
Qualified prerequisites	None
Preparations	Read Sami Franssila "Introduction to Microfabrication" (2010), Chapter 5: Thin-Film Materials and Processes (Available online from DTU campus).
Course responsible	The Thin Film group at DTU Nanolab (thinfilm@nanolab.dtu.dk)
Learning goals	Be aware of relevant material properties for thin films made in the cleanroom Understand different thin film techniques Compare and be able to select appropriate thin film technique

Material for preparations and further information

Slides from the lectures

Slides from lecture 1

Lecture slide show Media:1_DTU_Nanolab_Thin_Film_TPT_final_April_2023.pptx

Slides from lecture 2

Lecture slide show Media:2_DTU_Nanolab_Thin_Film_TPT_final_May2023.pptx

THIS PAGE IS UNDER CONSTRUCTION

Literature

Some literature about thin films can be found here (requires a login):

Introduction to thin films

Thermal Oxidation

S. Franssila, (2010), Introduction to Microfabrication, Chapter 13: Thermal Oxidation

@@ Line 32: / Line 32: @@
 <i>Sign up for the next lecture here: https://nanolab.doodle.com/poll/k4pdm2n4bpseww5e.
-The next lecture will be held on the 13th of June 2023 from 10:00 to 12:00.
 No lecture will be held in July.
@@ Line 57: / Line 55: @@
 <i>Sign up for the next lecture here: https://nanolab.doodle.com/poll/4r3ydwzzbrdepgpf
-The next lecture will be held on the 15th of June from 9:00 to 12:00.
 No lecture will be held in July.