Revision as of 14:18, 11 May 2023

Feedback to this page: click here

Unless otherwise stated, this page is written by DTU Nanolab internal

Installing XRD data analysis software

The main data analysis software available to all users of DTU Nanolab's XRD equipment is Rigaku SmartLab Studio II. This software can be installed freely on you own computer. The computer has to be on the DTU Network, either as a regular DTU computer or by VPN to obtain a network license. See description in this document.

For users of the XRD Powder, we recommend to also install the Crystallography Open Database, for material cards, and either Data Viewer or PowDLL for data conversion. See this page.

Note it is also possible to access the software by remote login to an analysis computer. See description here (requires login) as the SmartLab Studio II software is installed on the same computer.

@@ Line 7: / Line 7: @@
 See description in this document.
-For users of the XRD Powder, we recommend to also install the Crystallography Open Database, for material cards, and either Data Viewer or PowDLL for data conversion. See .
+For users of the XRD Powder, we recommend to also install the Crystallography Open Database, for material cards, and either Data Viewer or PowDLL for data conversion. See [[Specific Process Knowledge/Characterization/XRD/XRD Powder/XRD Powder software| this page]].
 Note it is also possible to access the software by remote login to an analysis computer. See description [https://labmanager.dtu.dk/view_binary.php?fileId=5533 here] (requires login) as the SmartLab Studio II software is installed on the same computer.