Specific Process Knowledge/Back-end processing/Polishing machine: Difference between revisions

Revision as of 15:25, 6 February 2023

Feedback to this page: click here

Unless anything else is stated, everything on this page, text and pictures are made by DTU Nanolab.

All links Labmanager requires login.

The Logitech PM5 Polisher/Lapper is for thinning down wafers and other substrates.

The user manual, user APV, technical information and contact information can be found in LabManager:

Equipment		Polisher/Lapper
Purpose	Thinning of substrates of	InP GaAs Silicon Metals Glass/Quartz
Performance	Thinning	Removal rate: 1-10µm/min Thickness accuracy: +/- 10 µm Thickness homogeneity: +/- 10 µm Roughness: +/- ? µm
Performance	Polishing	Removal rate: ~1 µm/min Thickness accuracy: ? µm Thickness homogeneity: ? µm Roughness: +/- ? µm
Process parameter range	Polishing liquid	Al2O3 (alumina) powder: 3, 9 or 20 µm Chemlox (for polishing) SF1 Polishing Fluid (for polishing e.g. SiO2)
	Polishing cloths	Chemcloth Polishing Cloths (for use with SF1 liquid)
	Rotation speed	Thinning: 5-20 rpm Polishing: 5-80 rpm
	Arm sweep	Thinning: stationary Polishing: 12% (inner) - 80% (outer)
Substrates	Batch size	# small samples one 50 mm wafer one 100 mm wafer
	Allowed materials	InP GaAs Silicon Metals Glass/Quartz

@@ Line 8: / Line 8: @@
 == Polisher/Lapper ==
-%[[image:Logitech pm5 1.jpg|400px|right|thumb|The Logitech PM5 Polisher/Lapper]]
+<!--[[image:Logitech pm5 1.jpg|400px|right|thumb|The Logitech PM5 Polisher/Lapper]]
-Training is required before using th machine. The machine is equipped with a LabManager lock.
+Training is required before using th machine. The machine is equipped with a LabManager lock.-->
 The Logitech PM5 Polisher/Lapper is for thinning down wafers and other substrates.