Specific Process Knowledge/Thin film deposition/Deposition of AZO: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Thin_film_deposition/Deposition_of_AZO click here]''' | '''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Thin_film_deposition/Deposition_of_AZO click here]''' | ||
''All content by DTU Nanolab staff''. | |||
AZO can be deposited by sputtering or atomic layer deposition (ALD). In sputter-deposition of AZO, we use an AZO target that may be RF-sputtered or reactively DC-sputtered. You can also co-deposit Al and ZnO. Note that in multipurpose sputter systems such as ours it may be difficult to obtain low enough contamination for high-quality AZO. Talk to Nanolab staff or your colleagues if you would like to locate a sputter system that can be dedicated to AZO-deposition. | AZO can be deposited by sputtering or atomic layer deposition (ALD). In sputter-deposition of AZO, we use an AZO target that may be RF-sputtered or reactively DC-sputtered. You can also co-deposit Al and ZnO. Note that in multipurpose sputter systems such as ours it may be difficult to obtain low enough contamination for high-quality AZO. Talk to Nanolab staff or your colleagues if you would like to locate a sputter system that can be dedicated to AZO-deposition. | ||