LabAdviser/314/Microscopy 314-307/SEM/QFEG: Difference between revisions
| Line 112: | Line 112: | ||
== STEM (Scanning Transmission Electron Microscopy) == | == STEM (Scanning Transmission Electron Microscopy) == | ||
STEM combines the principles of transmission electron microscopy and scanning electron microscopy and can be performed on either type of instrument. In the STEM setting, the sample requires to have a thickness of less than 200 nm for visualization. Sample preparation prior to microscopy involve samples being embedded in epoxy resin and then ultra section using the | STEM combines the principles of transmission electron microscopy and scanning electron microscopy and can be performed on either type of instrument. In the STEM setting, the sample requires to have a thickness of less than 200 nm for visualization. Sample preparation prior to microscopy involve samples being embedded in epoxy resin and then ultra section using the [[LabAdviser/314/Microscopy 314-307/TEM/Tips/MagicSwitch|Ultramicrotome]]. Thin sections at cryogenic temperatures (below −180 °C) can also be done at Nanolab. | ||
[[File:20210519_Microalgae_K2_007-1.jpg|500px|left|thumb|STEM imaging of a cross section of Microalgae, 100 nm thick section]]<br clear="all" /> | [[File:20210519_Microalgae_K2_007-1.jpg|500px|left|thumb|STEM imaging of a cross section of Microalgae, 100 nm thick section]]<br clear="all" /> | ||