Jump to content

LabAdviser/314/Microscopy 314-307/TEM/ETEM/OneView: Difference between revisions

← Older editNewer edit →
VisualWikitext
Jenk (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891
812 edits
mNo edit summary
Jenk (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891
812 edits
Line 22: Line 22:
=== image acquisition ===
=== image acquisition ===


1. If GMS3 (Gatan Microscopy Suite; also known as Digital Micrograph) is not running yet on the separate computer (large screen), click on the GMS icon and acknowledge any information message.<br />
1. If GMS3 (Gatan Microscopy Suite; also known as Digital Micrograph) is not running on the separate computer (large screen) yet, click on the GMS icon and acknowledge any information message.<br />
<br />
<br />
2.  
2. Check in the '''Camera Monitor''' that the temperature is -5C. Else, wait until it reaches this temperature.<br />
<br />
3. On the Microscope PC, the software '''Gatan Remote''' should be running in the background. If not, start this software.<br />
<br />
4. On the left hand side under '''Microscope''', GMS shows the visualization of the TEM. Here, HT and Magnification should be the same as in the Microscope PC. Clicking on '''Valves''' will open or close the Column Valves, '''Blank''' will blank the beam before the sample, clicking on the '''Phosphorous screen''' will lift or lower the screen. Right click on the '''OneView''' camera icon opens a context menu, where the camera can be inserted or retracted.<br /><br />
!!! The Ultrascan camera needs to be retracted before inserting the OneView camera !!!<br />
<br /><br />




Go to "Customs" and "SetDoseCalibrationTag_OneView_mod-DTU" <br />
[[File:Oneview_1.png|600px|center|thumb|Run script]]
<br clear="all" />


2. Type in the high tension the microscope is running in the pop-up window<br />
[[File:Oneview_2.png|300px|center|thumb|Select high tension]]
<br clear="all" />


3. Don't change the conversion factor; just click on "OK"<br />
<!-- Go to "Customs" and "SetDoseCalibrationTag_OneView_mod-DTU" <br />
[[File:Oneview_3.png|300px|center|thumb|Don't change conversion factor]]
[[File:Oneview_1.png|600px|center|thumb|Run script]]
<br clear="all" />
<br clear="all" /> -->




'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/LabAdviser/314/ETEM/OneView click here]'''
'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/LabAdviser/314/ETEM/OneView click here]'''
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=LabAdviser/314/Microscopy_314-307/TEM/ETEM/OneView"