Specific Process Knowledge/Thin film deposition/Lesker: Difference between revisions
| Line 141: | Line 141: | ||
==Oxide insulation analysis== | ==Oxide insulation analysis== | ||
''by Bjarke Thomas Dalslet @Nanotech.dtu.dk'' | |||
The wafers in this analysis consisted of a Si substrate with no native oxide. A layer of SiO<math>_2</math> was reactively sputtered (9% O2 90 W 3.5 mTorr). After that, using a shadow mask, 200nm thick gold rectangles was electro deposited on top of the oxide. Gold was also electro deposited on the back side. Then the impedance as a function of frequency was recorded. | The wafers in this analysis consisted of a Si substrate with no native oxide. A layer of SiO<math>_2</math> was reactively sputtered (9% O2 90 W 3.5 mTorr). After that, using a shadow mask, 200nm thick gold rectangles was electro deposited on top of the oxide. Gold was also electro deposited on the back side. Then the impedance as a function of frequency was recorded. | ||