Revision as of 13:06, 25 June 2020

Installing XRD data analysis software

The main data analysis software available to all users of DTU Nanolab's XRD equipment is Rigaku SmartLab Studio II. This software can be installed freely on you own computer, the computer has to be on the DTU Network, either as a regular DTU computer or by VPN to obtain a network license. To use a link, rightclick and select copy link, paste the link in windows explore to open it.

To get SmartLab Studio II installed please install CodeMeter and SmartLab Studio II, and configure the SmartLab Studio II database.

For users of the XRD Powder, we recommend to also install the Crystallography Open Database, for material cards, and either Data Viewer or PowDLL for data conversion.

Install DTU Local Admin (Only on DTU computers)

For installing you will need administrator privileges on the computer. On your DTU computer you can gain this by installing “DTU Local Admin” from the “DTU software center”. In DTU Local Admin you can enable a local admin account, which can be used to gain elevated privileges for installation.

Open “DTU Software Center” and search for and install “DTU Local Admin”.
Open “DTU Local Admin” and enable the local admin account. Note down the user (normally “.\adm-local”) and the password (randomly generated). This will be needed later.

Install SmartLab Studio II

The following items must all be installed for SmartLab Studio II to work.

Install and configure CodeMeter

Open [file://///ait-pdfs/department/nlab/CleanroomDrive/_equipment/XRD/SmartLabStudioII/CodeMeterRuntime.exe Install CodeMeter (Needs DTU network)]
Use the .\adm-local account to elevate the privileges if on DTU computer.
Use you DTU credentials to logon to the ait-pdfs file server.
Complete the install.
Open “CodeMeter Control Center” and click om WebAdmin.
On the web page, click on "Configuration" at the top bar. A tab named “Server Search List” will be shown. Click on “add new Server” and type “rigaku.ait.dtu.dk” and press add.
Click “Apply to save changes.
You can now close the WebAdmin page and CodeMeter control center.

Installation of SmartLab Studio II

Open [file://///ait-pdfs/department/nlab/CleanroomDrive/_equipment/XRD/SmartLabStudioII/SmartLabStudioIIinstaller.exe Install SmartLab Studio II (Needs DTU network)]
Use the .\adm-local account to elevate the privileges if on DTU computer.
Use you DTU credentials to logon to the ait-pdfs file server.
Complete the install.

Install SlimDX Runtime

Open [file://///ait-pdfs/department/nlab/CleanroomDrive/_equipment/XRD/SmartLabStudioII/SlimDX.msi Install SlimDX Runtime (Needs DTU network)]
Use the .\adm-local account to elevate the privileges if on DTU computer.
Use you DTU credentials to logon to the ait-pdfs file server.
Complete the install.

SmartLab Studio nice to have

The following items are nice to have in your SmartLab Studio setup. It includes connection to the common database with users and measurements and the Crystallography Open Database (COD).

Setting up SmartLab Studio II database

Open [file://///ait-pdfs/department/nlab/CleanroomDrive/_equipment/XRD/SmartLabStudioII/SQLserverConnectionSettings.exe Configure SmartLab Studio II SQL connection (Needs DTU network)]
Use the .\adm-local account to elevate the privileges if on DTU computer.
Use you DTU credentials to logon to the ait-pdfs file server.
It takes a up to a couple of minutes for the program to open, be patient. (If it does not open, contact Kristian Hagsted Rasmussen
When open type in the following:
- SQL Server host name: nlab-pgaudio01.win.dtu.dk
- SQL login name: RigakuDB
- Password: Renrum12
Click Connection and wait for confirmation, the click apply.
You can now open SmartLab Studio II and use you on credentials for logging in.

Installing the Crystallography Open Database

Open [file://///ait-pdfs/department/nlab/CleanroomDrive/_equipment/XRD/SmartLabStudioII/PDXLCODsetup.exe Install Crystallography Open Database (Needs DTU network)]
Use the .\adm-local account to elevate the privileges if on DTU computer.
Use you DTU credentials to logon to the ait-pdfs file server.
Complete the install.

Powder XRD data convertion

The following software can be installed to view and convert measurements form the XRD Powder to be analysed in SmartLab Studio II.

Installation of Panalytical Data Viewer

Open [file://///ait-pdfs/department/nlab/CleanroomDrive/_equipment/XRD/SmartLabStudioII/PANalyticalDataViewer.exe Install Data Viewer (Needs DTU network)]
Use the .\adm-local account to elevate the privileges if on DTU computer.
Use you DTU credentials to logon to the ait-pdfs file server.
Complete the install.

Installation of PowDLL for data conversion

Open [file://///ait-pdfs/department/nlab/CleanroomDrive/_equipment/XRD/SmartLabStudioII/PowDLL_Setup.exe Install PowDLL (Needs DTU network)]
Use the .\adm-local account to elevate the privileges if on DTU computer.
Use you DTU credentials to logon to the ait-pdfs file server.
Complete the install.

@@ Line 9: / Line 9: @@
 ==Install DTU Local Admin (Only on DTU computers)==
 <!-- [[File:SLSII_Install_Local_Admin.gif|right|400px|caption]] -->
-For installing you will need administrator privileges on the computer. At DTU you can gain this by installing “DTU Local Admin” from the “DTU software center”. In DTU Local Admin you can enable a local admin account, which can be used to gain elevated privileges for installation.
+For installing you will need administrator privileges on the computer. On your DTU computer you can gain this by installing “DTU Local Admin” from the “DTU software center”. In DTU Local Admin you can enable a local admin account, which can be used to gain elevated privileges for installation.
 *Open “DTU Software Center” and search for and install “DTU Local Admin”.
 *Open “DTU Local Admin” and enable the local admin account. Note down the user (normally “.\adm-local”) and the password (randomly generated). This will be needed later.