Specific Process Knowledge/Etch/DRIE-Pegasus/System-description: Difference between revisions
| Line 6: | Line 6: | ||
<!-- revised 1/4-2020 by jmli --> | <!-- revised 1/4-2020 by jmli --> | ||
This section applies to Pegasus | This section applies to all Pegasus tools. For Pegasus 4, however, it is less important as dielectrics etches are continuous. | ||
The DRIE-Pegasus tools take the well established Bosch process known from the [[Specific_Process_Knowledge/Etch/ASE_(Advanced_Silicon_Etch)|ASE]] a significant step further. In the ASE the Bosch process has two cycles, etch and passivation. During each cycle the process parameters are kept constant: | The DRIE-Pegasus tools take the well established Bosch process known from the [[Specific_Process_Knowledge/Etch/ASE_(Advanced_Silicon_Etch)|ASE]] a significant step further. In the ASE the Bosch process has two cycles, etch and passivation. During each cycle the process parameters are kept constant: | ||