Specific Process Knowledge/Thin film deposition/Deposition of Tungsten: Difference between revisions
No edit summary |
No edit summary |
||
Line 5: | Line 5: | ||
! | ! | ||
! E-beam evaporation ([[Specific Process Knowledge/Thin film deposition/Alcatel|Alcatel]]) | ! E-beam evaporation ([[Specific Process Knowledge/Thin film deposition/Alcatel|Alcatel]]) | ||
|- | |- | ||
| Batch size | | Batch size | ||
Line 11: | Line 10: | ||
*Up to 1x4" wafers | *Up to 1x4" wafers | ||
*smaller pieces | *smaller pieces | ||
|- | |- | ||
| Pre-clean | | Pre-clean | ||
|RF Ar clean | |RF Ar clean | ||
|- | |- | ||
| Layer thickness | | Layer thickness | ||
|10Å to 1µm | |10Å to 1µm | ||
|- | |- | ||
| Deposition rate | | Deposition rate | ||
|2Å/s to 15Å/s | |2Å/s to 15Å/s | ||
|- | |- | ||
|} | |} |
Revision as of 14:43, 15 August 2011
Tungsten (W) can be deposited by e-beam evaporation. In the chart below you can compare the different deposition equipment.
E-beam evaporation (Alcatel) | |
---|---|
Batch size |
|
Pre-clean | RF Ar clean |
Layer thickness | 10Å to 1µm |
Deposition rate | 2Å/s to 15Å/s |