LabAdviser: Difference between revisions
No edit summary |
No edit summary |
||
Line 2: | Line 2: | ||
[[image:Front page image 20160122.jpg|right|500x500px]] | [[image:Front page image 20160122.jpg|right|500x500px]] | ||
<!--LabAdviser is a process handbook for equipment and processes at the cleanroom facilities and the characterisation facilities in building 314/307. The function and capacity of each piece of equipment is described and general process steps, eg photolithography procedures, are clarified. LabAdviser is meant to advise you to a good starting point for your cleanroom process for further optimization to meet your needs. To enter LabAdviser you need to '''log in with your DTU login'''. LabAdviser is only editable for DTU Nanolab employees. If you need further information about certain machinery or processes, please contact Nanolab personnel. Any feedback you might have on LabAdviser is welcome and can be given by mail to the LabAdviser mailbox: [mailto:labadviser@nanolab.dtu.dk labadviser@nanolab.dtu.dk]--> | <!--LabAdviser is a process handbook for equipment and processes at the cleanroom facilities and the characterisation facilities in building 314/307. The function and capacity of each piece of equipment is described and general process steps, eg photolithography procedures, are clarified. LabAdviser is meant to advise you to a good starting point for your cleanroom process for further optimization to meet your needs. To enter LabAdviser you need to '''log in with your DTU login'''. LabAdviser is only editable for DTU Nanolab employees. If you need further information about certain machinery or processes, please contact Nanolab personnel. Any feedback you might have on LabAdviser is welcome and can be given by mail to the LabAdviser mailbox: [mailto:labadviser@nanolab.dtu.dk labadviser@nanolab.dtu.dk]--> | ||
LabAdviser is a wiki accessible for users of the DTU Nanolab facilities. If you are not a current user, '''please take a look at our homepage''' [[https://www.nanolab.dtu.dk/english]]. You can also take a '''virtuel tour of the DTU Nanolab cleanroom facility''' [[https://my.matterport.com/show/?m=n7rBdnKvgxd ]] or explore our '''YouTube channel''' [[https://www.youtube.com/channel/UCJhdUTUJRDNODNiC3V95RQQ]] with a selection of training videos <br> | LabAdviser is a wiki accessible for users of the DTU Nanolab facilities. If you are not a current user, '''please take a look at our homepage''' [[https://www.nanolab.dtu.dk/english]]. You can also take a '''virtuel tour of the DTU Nanolab cleanroom facility''' [[https://my.matterport.com/show/?m=n7rBdnKvgxd ]] or explore our '''YouTube channel''' [[https://www.youtube.com/channel/UCJhdUTUJRDNODNiC3V95RQQ]] with a selection of training videos. <br> | ||
LabAdviser contains information about | LabAdviser contains information about |
Revision as of 11:51, 29 January 2020
LabAdviser is a wiki accessible for users of the DTU Nanolab facilities. If you are not a current user, please take a look at our homepage [[1]]. You can also take a virtuel tour of the DTU Nanolab cleanroom facility [[2]] or explore our YouTube channel [[3]] with a selection of training videos.
LabAdviser contains information about
- equipment at DTU Nanolab that covers micro and nano fabrication in the cleanroom facility in building 346 and surroundings (in building 346 and 347) and characterization equipment, primarily electron microscopy, at building 314 and 307.
- fabrication steps in micro and nano fabrication that takes place at the cleanroom fabrication facility and surroundings and
- electron microscopy methods that takes place at building 314/307.
An overview of the equipment in these facilities can be found and some fabrication process flows and singles fabrication steps are described. In general LabAdviser is meant to advise you to the right equipment and to advise you to a good starting point for your micro and nano fabrication steps as for your electron microscopy work. This should not be replacing communication with the staff of the facilities but we recommend it as a good starting point before contacting the staff. To enter LabAdviser you need to log in with your DTU login. LabAdviser is only editable for the staff of the facilities. If you need further information about certain machinery or processes, please contact the relevant staff. Any feedback or input you might have to LabAdviser is welcome and can be given by mail to the LabAdviser mailbox: labadviser@nanolab.dtu.dk
News in LabAdviser:
- The latest LabAdviser update: LabAdviser update send out 2020-01-17
- Slides from the latest Tech Forum are here: Tech_Forum_2019_2
Contents
- Introduction to LabAdviser and Micro/Nano Fabrication
- Introduction to LabManager
- Process flow approval (fabrication)
- Characterization in building 314/307
- Micro and Nano Fabrication Overview
- Technology Research
- Courses (Introduction course, Tool Package Training's (TPT))
- Surveys, statistics, monthly LabAdviser updates and other info.
- How to add information to LabAdviser
Overview of micro and nano fabrication steps - a guide to where you can find fabrication information in LabAdviser:
Contact Information for the DTU Nanolab fabrication part
In order to get the quickest response to training requests, process approvals, questions etc. please use the following mailboxes to DTU Nanolab (formerly known as Danchip).
Subject | Description | |
Training and Process Flow | training@nanolab.dtu.dk | All requests regarding equipment training and process flows. Please add your Name to the subject line. Note: Requests are commonly answered within 2 workdays. |
E-beam training | e-beam@nanolab.dtu.dk | Requests regarding training on JEOL JBX-9500FSZ or Raith Eline e-beam systems. Please study the material on the EBL Labadviser pages beforehand. |
E-beam Cassette loading | e-beamload@nanolab.dtu.dk | Requests regarding cassette loading on JEOL JBX-9500FSZ. |
General inquiries | nanolabsupport@nanolab.dtu.dk | Inquiries related to machines, cleanroom access, Mask review, tool changes, and others. Please add your Name to the subject line. Note: Requests are commonly answered within 2 workdays. |
Metal Wishes | metal@nanolab.dtu.dk | Requests for change of metal in Thin Film Deposition equipment. See current and future materials in statuslog of the respective machines.
|
Gas-related Requests | DCH-Gas@nanolab.dtu.dk | All topics gas-related (issues, information regarding ordering, delivery, changing etc). Mostly for internal DTU Nanolab use. |
LabAdviser Mailbox | labadviser@nanolab.dtu.dk | Any questions or feedback to LabAdviser. |
Commercial Inquiries | sales@nanolab.dtu.dk | For all inquiries regarding in-sourcing, commercial applications, rent of cleanroom space, etc |
DTU Nanolab Fabrication Cleanroom Naming and Phone Numbers
|
|
DTU Nanolab building 314 and Phone Numbers
|
|