Specific Process Knowledge/Lithography/EBeamLithography/JBX9500Manual: Difference between revisions
| Line 16: | Line 16: | ||
*In E-2, all users must keep within the area between the front side of the machine and the table with the pre-aligner setup. Only JEOL staff or DTU Nanolab staff may access the backside of the machine. | *In E-2, all users must keep within the area between the front side of the machine and the table with the pre-aligner setup. Only JEOL staff or DTU Nanolab staff may access the backside of the machine. | ||
*No users, not even authorised users, are allowed to load a substrate into the autoloader (robot loader). | *No users, not even authorised users, are allowed to load a substrate into the autoloader (robot loader). | ||
*After your exposure, fully trained users can unload their cassettes from the autoloader | *After your exposure, fully trained users can unload their cassettes from the autoloader and unmount their substrates . | ||
*If you are prohibited to unmount your substrates before another user requires the cassette, you must accept that either the next user or DTU Nanolab personel unmount your substrates. | *If you are prohibited to unmount your substrates before another user requires the cassette, you must accept that either the next user or DTU Nanolab personel unmount your substrates. | ||