Jump to content

Specific Process Knowledge/Back-end processing/Disco Saw: Difference between revisions

← Older editNewer edit →
VisualWikitext
Jehan (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891, Bureaucrats, danchip, Administrators
1,093 edits
Jehan (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891, Bureaucrats, danchip, Administrators
1,093 edits
Line 5: Line 5:


The dicer at DTU Nanolab is placed in room 157 on the first floor in bldg. 346. Please notice that this is not a cleanroom and that the dicing process is very dirty.  
The dicer at DTU Nanolab is placed in room 157 on the first floor in bldg. 346. Please notice that this is not a cleanroom and that the dicing process is very dirty.  
[[Image:Disco_DAD_321_Dicer.jpg|500x500px|thumb|Dicer positioned on 1. floor bldg 346 room 157]]


In general it is ''not allowed'' to bring back your samples into the Cleanroom. You need approval from DTU Nanolab staff to do this. Your samples have to be thoroughly cleaned in the gowning area and get a Piranha cleaning. You will only be allowed to use a limited number of tools for the processing after dicing.  
In general it is ''not allowed'' to bring back your samples into the Cleanroom. You need approval from DTU Nanolab staff to do this. Your samples have to be thoroughly cleaned in the gowning area and get a Piranha cleaning. You will only be allowed to use a limited number of tools for the processing after dicing.  
Line 11: Line 12:
Please see the illustrations for a good and a bad design.
Please see the illustrations for a good and a bad design.


[[Image:Good design 2.jpg|500x500px|Good design]]
{| cellpadding="2" style="border: 2px solid darkgray;" align="right"
[[Image:Good design 3.jpg|500x500px|Bad design]]
! width="350" |
[[Image:Bad design 1 w. text.jpg|500x500px|Bad design]]
! width="350" |
[[Image:Disco_DAD_321_Dicer.jpg|500x500px|Dicer positioned on 1. floor bldg 346 room 157]]
! width="350" |
 
|- align="center"
| '''GOOD design''' ||  '''GOOD design''' || '''BAD design'''
 
|- border="1" align="center"
|[[Image:Good design 2.jpg|500x500px|Good design]] || [[Image:Good design 3.jpg|500x500px|Good design]] || [[Image:Bad design 1 w. text.jpg|500x500px|BAD design]]
|
 
|- align="center"
| '''GOOD design''' ||  '''GOOD design''' || '''BAD design'''
 
|}
 


'''The user manual, user APV, technical information and contact information can be found in LabManager:'''  
'''The user manual, user APV, technical information and contact information can be found in LabManager:'''  
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Back-end_processing/Disco_Saw"