|
|
| Line 70: |
Line 70: |
|
| |
|
| We can also provide guidance regarding the mask design phase. Please contact the mask team for help and review, E-mail address can be found in [[Danchip_contact_information]]. | | We can also provide guidance regarding the mask design phase. Please contact the mask team for help and review, E-mail address can be found in [[Danchip_contact_information]]. |
|
| |
| === Old procedure for How to order a mask===
| |
|
| |
| Our standard mask supplier is [http://deltamask.nl/ Delta Mask].
| |
| The smallest feature size obtainable from Delta Mask is 1.5 µm. If you need structures smaller than this please write it specificly in the e-mail. Be aware that this will increase the price by at least a factor of 3.
| |
|
| |
| Send your CIF file or GDS file (for 7" mask or masks with CD less than 1.5µm only GDS formats should be used) in an e-mail along with a text file describing your specs ([[mask_spec|example spec file]]).
| |
|
| |
| If you are using L-edit to design your mask you should remember to mark the top cell as the fabrication cell (a small pink <b style="color:magenta">''f''</b> should show to the left of the cell name in the Design Navigator.
| |
|
| |
| Remember to make only the layers for fabrication visible. The remaining should be invisible.
| |
| Give each layer appropriate GDS number respectively CIF names before exporting the file. This is done by double click on the layers and fill out the window that pops up.
| |
|
| |
| E-mail address can be found in [[Danchip_contact_information]].
| |
|
| |
| Cost is available upon request. Write to [mailto:danchipsupport@danchip.dtu.dk danchipsupport@danchip.dtu.dk]
| |
|
| |
|
| == Mask sets made by Danchip == | | == Mask sets made by Danchip == |
