LabAdviser/314/Microscopy 314-307/Postprocessing: Difference between revisions

Revision as of 10:07, 7 February 2019

Feedback to this page: click here

At DTU Nanolab - building 307/314 you will find a small PC lab where there is access to all the processing and productivity software available at DTU Cen. The lab is located in building 307 room 101. There are four workstations which you can access with your DTU credentials. The following software is installed on all workstations:

Microsoft Office 2016

Digital Micrograph v2 (TEM image processing and analysis)

TIA v4.19 (TEM/STEM image processing and analysis) (ask Cen staff for access)

JEMS v4.3905 (TEM/STEM/Diffraction analysis and simulation)

AZtec v3.3 (SEM and TEM) (EDX spectrum and map analysis)

INCA v5.0.5 (EDX analysis)

Avizo v9.5 (3D rendering)

Additionally, some of the workstations have node-locked licenses to:

PANalytical X’pert Highscore Plus (XRD data analysis): Cen-Himmelbjerg, Cen-Froebjerg, Cen-Valbybakke

Inspect 3D (Tomography reconstruction): Cen-Himmelbjerg, Cen-Froebjerg

TrueImage v2.0.1 (TEM image reconstruction): Cen-Himmelbjerg, Cen-Froebjerg, Cen-Valbybakke, Cen-Yding

Esprit 2.0 (EBSD analysis): Cen-Himmelbjerg, Cen-Froebjerg, Cen-Valbybakke, Cen-Yding

Additionally, there are two workstations available in the lobby of 314. The same software is installed on these machines. One of these workstations (in front of the ATEM) is specifically made to work with large data sets created with the OneView camera of the ETEM.

Please remember to log out when you have finished your work. Do not turn off the workstations.

Revision as of 16:18, 30 October 2018 view source Jenk (talk \| contribs) DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891 742 edits No edit summary ← Older edit		Revision as of 10:07, 7 February 2019 view source Jenk (talk \| contribs) DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891 742 edits No edit summary Newer edit →
Line 2:		Line 2:


	At DTU ~~Cen~~ you will find a small PC lab where there is access to all the processing and productivity software available at DTU Cen. The lab is located in building 307 room 101. There are four workstations which you can access with your DTU credentials. The following software is installed on all workstations:		At DTU Nanolab - building 307/314 you will find a small PC lab where there is access to all the processing and productivity software available at DTU Cen. The lab is located in building 307 room 101. There are four workstations which you can access with your DTU credentials. The following software is installed on all workstations:

	Microsoft Office 2016		Microsoft Office 2016