LabAdviser/314/Microscopy 314-307/SEM/Nova/Micro 4-point probe: Difference between revisions
| Line 8: | Line 8: | ||
s1= s2 = s3 = s, the resistivity is given by: | s1= s2 = s3 = s, the resistivity is given by: | ||
ρ = 2aπsV/I (1) | |||
where a is the thickness correction factor for thicknesses t equal to or less than half the probe spacing (t/s < 0.5): | where a is the thickness correction factor for thicknesses t equal to or less than half the probe spacing (t/s < 0.5): | ||
a = 0.72t/s (2) | |||
Substituting Eq. 2 in Eq. 1 we get: | Substituting Eq. 2 in Eq. 1 we get: | ||
ρ = 2aπsV/I = 4.53V/I (3) | |||
If both sides of Eq. 3 are divided by t we get: | If both sides of Eq. 3 are divided by t we get: | ||
Rs = ρ/t = 4.53V/I (4) | |||
which we refer to as sheet resistance. When the thickness t is very small respect to the spacing s, Rs is the preferred measurement quantity, being independent of any geometrical dimension and therefore a function of the material alone. | which we refer to as sheet resistance. When the thickness t is very small respect to the spacing s, Rs is the preferred measurement quantity, being independent of any geometrical dimension and therefore a function of the material alone. | ||