Specific Process Knowledge/Etch/DRIE-Pegasus/System-description: Difference between revisions
| Line 2: | Line 2: | ||
<!--Checked for updates on 14/5-2018 - ok/jmli --> | <!--Checked for updates on 14/5-2018 - ok/jmli --> | ||
== Description of the Bosch process at the DRIE-Pegasus ( | == Description of the Bosch process at the DRIE-Pegasus == | ||
--26 November 2012 Jml (Talk | contribs)-- | |||
<!-- revised 15/5-2018 by jmli --> | <!-- revised 15/5-2018 by jmli --> | ||
The DRIE-Pegasus takes the well established Bosch process known from the [[Specific_Process_Knowledge/Etch/ASE_(Advanced_Silicon_Etch)|ASE]] a significant step further. In the ASE the Bosch process has two cycles, etch and passivation. During each cycle the process parameters are kept constant: | The DRIE-Pegasus takes the well established Bosch process known from the [[Specific_Process_Knowledge/Etch/ASE_(Advanced_Silicon_Etch)|ASE]] a significant step further. In the ASE the Bosch process has two cycles, etch and passivation. During each cycle the process parameters are kept constant: | ||