Specific Process Knowledge/Back-end processing/Polymer Injection Molder: Difference between revisions

@@ Line 14: / Line 14: @@
 [http://labmanager.danchip.dtu.dk/function.php?module=Machine&view=view&mach=278 Polymer injection molding Info on LabManager]
-== Process information ==
+== Polymers ==
-There are no standard processes on the injection molder, since the type of process chosen and process parameters will depend on which polymer that will be used and what type of pattern that is to be replicated during the molding process. At Danchip the following polymers are used routinely:
+At Danchip the following polymers are used routinely:
-Topas 5013L-10<br>
+*Topas 5013L-10<br>
-Topas 8007S-04<br>
+*Topas 8007S-04<br>
-PP<br>
+*PP<br>
-PMMA<br>
+*PMMA<br>
 Topas polymers are supplied by Danchip. All other polymers are purchased by the users themselves. All polymers must be approved for use at DTU Danchip. If you would like to use a new polymer or a new grade of a certain polymer, please fill out the New_polymer_application.dotx form which can be found in LabManager by going to the Documents tab of the 'Info' page for the Polymer Injection Molding machine. You can also use this direct link: [http://labmanager.dtu.dk/view_binary.php?fileId=2857 New_polymer_application]