Jump to content

Specific Process Knowledge/Bonding/Anodic bonding: Difference between revisions

← Older editNewer edit →
VisualWikitext
Taran (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891
3,531 edits
Rkch (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
285 edits
No edit summary
Line 8: Line 8:


Try and put this as one of the last steps in you process sequence, since you cannot do high temperature steps in DANCHIPS cleanroom with Pyrex wafer. This also includes the plasma systems.
Try and put this as one of the last steps in you process sequence, since you cannot do high temperature steps in DANCHIPS cleanroom with Pyrex wafer. This also includes the plasma systems.
===Bonding procedure===
*If the wafers are to be aligned remember to put the Si wafers in first (Si wafer closest to the chuck).
*If the wafers are just stacked on top of each other remember to put the Si below (Si wafer closest to the chuck).
*Align the wafers
*Place the chuck and graphite electrode in the chamber.
*Close the chamber.
*Turn the µm screw on top of the chamber to set the desired stack height.
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Bonding/Anodic_bonding"