Specific Process Knowledge/Etch/DRIE-Pegasus/FAQ: Difference between revisions
No edit summary |
|||
| Line 2: | Line 2: | ||
<!--Checked for updates on 2/2-2016 - ok/jmli --> | <!--Checked for updates on 2/2-2016 - ok/jmli --> | ||
== Some questions and answers == | == Some questions and answers == | ||
'''Disclaimer''' | |||
The content in here (and the links below) is from email correspondence with SPTS - We pose a question and they answer. The content is, at most, only slightly modified from the original emails and thus may appear somewhat sloppily written. You may, however, find some useful answers. The idea is to share some valuable and potentially very useful information that would otherwise be hidden from everybody except the persons in the correspondence. Hidden deep inside an email correspondence, the information is also very likely to get completely lost should the people involved decide to change job. | |||
*[[Specific Process Knowledge/Etch/DRIE-Pegasus/FAQ/Hardware|Hardware and setup]] | *[[Specific Process Knowledge/Etch/DRIE-Pegasus/FAQ/Hardware|Hardware and setup]] | ||
Revision as of 12:50, 16 May 2018
Feedback to this page: click here
Some questions and answers
Disclaimer
The content in here (and the links below) is from email correspondence with SPTS - We pose a question and they answer. The content is, at most, only slightly modified from the original emails and thus may appear somewhat sloppily written. You may, however, find some useful answers. The idea is to share some valuable and potentially very useful information that would otherwise be hidden from everybody except the persons in the correspondence. Hidden deep inside an email correspondence, the information is also very likely to get completely lost should the people involved decide to change job.