Jump to content

Specific Process Knowledge/Wafer cleaning/IMEC: Difference between revisions

← Older editNewer edit →
VisualWikitext
Line 3: Line 3:
===IMEC process for cleaning of wafers before fusion bonding:===
===IMEC process for cleaning of wafers before fusion bonding:===


Ophav IMEC
''Ophav IMEC
Spørg Karen om der er lavet modificeringer
Spørg Karen om der er lavet modificeringer''


{| border="1" cellspacing="0" cellpadding="5" align="center"
{| border="1" cellspacing="0" cellpadding="5" align="center"
Line 14: Line 14:
|-  
|-  
| 1
| 1
| Pre bonding cleaning of Si wafers with cavities and SOI wafers with nitride
| Pre-bond cleaning of Si wafers prior to fusion bonding.
|
|
|
|Use wafers with cavities on and SOI wafers
*Takes 1½ hours
*Takes 1½ hours
*Orient flat to minimize handling
*Orient flat to minimize handling
Line 31: Line 31:
Pour up H2SO4 first, put wafers in carrier (USE this in steps4.1-4.6), add H2O2, wait 30 sec, dip wafers.
Pour up H2SO4 first, put wafers in carrier (USE this in steps4.1-4.6), add H2O2, wait 30 sec, dip wafers.
|Maybe clean the tank the day before!
|Maybe clean the tank the day before!
Put into dedicated wet box for IMEC
|-
|-
|3
|3
Line 45: Line 44:
Time: 100 sec
Time: 100 sec
(two black spots)
(two black spots)
|Clean tank (cleanroom 4, tank for buffer with wetting solution) and make your own, it needs 2 bottles
|Clean tank (cleanroom 4, tank for buffer with wetting solution) and make your own. Mix in dedicated bottle (IMEC) in fume hood and add to tank using BHF pump from RCA fumehood!  
Bottles are in service room 2 on the left, pump is by Leica microscope in cleanroom 3
|
|Bottle for mixing is in service room 2, use BHF pump from RCA fumehood!
.
Put into dedicated wet box for IMEC
|-
|-
|5
|5
|Rinse
|Rinse
|2 min. rinse
|2 min. rinse
|
|Put into dedicated wet box for IMEC
|
 
|.
|-
|-
|6
|6
Line 65: Line 64:


Makes wafers hydrophilic
Makes wafers hydrophilic
|Put into dedicated wet box for IMEC
|.
|-
|-
|7
|7
|Rinse & spin dry
|Rinse & spin dry
|5 min rinse
|5 min rinse
|
|.
|Put into dedicated wet box for IMEC
|.
|-
|-
|8
|8
|Put wafers in new clean carrier box
|Put wafers in new clean carrier box
|
|.
|
|.
|
|.
|-
|-
|}
|}
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Wafer_cleaning/IMEC"