Jump to content

Specific Process Knowledge/Lithography/Baking: Difference between revisions

← Older editNewer edit →
VisualWikitext
Taran (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891
3,527 edits
Taran (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891
3,527 edits
Line 165: Line 165:
<gallery caption="Fumehood hotplates" widths="220px" heights="225px" perrow="5">  
<gallery caption="Fumehood hotplates" widths="220px" heights="225px" perrow="5">  
image:FumehoodHotplate in C-1.jpg|Fumehood hotplate for [[Specific_Process_Knowledge/Lithography/Coaters#Manual_Spinner_.28Polymers.29|Manual Spinner (Polymers)]].
image:FumehoodHotplate in C-1.jpg|Fumehood hotplate for [[Specific_Process_Knowledge/Lithography/Coaters#Manual_Spinner_.28Polymers.29|Manual Spinner (Polymers)]].
image:KOH_4tommer.jpg|BHF in cleanroom C-1 (KOH bench 1+2.) The BHF bath is positioned between the two KOH baths. This is primarily used to remove oxide before and after a KOH etch.  
image:FumehoodHotplate in E-5.jpg|BHF in cleanroom C-1 (KOH bench 1+2.) The BHF bath is positioned between the two KOH baths. This is primarily used to remove oxide before and after a KOH etch.  
image:KOH3 RR4 1.JPG|BHF in cleanroom D-3 (KOH bench 6".) The BHF bath is positioned to the right. This is primarily used to remove oxide before and after a KOH etch.  
image:KOH3 RR4 1.JPG|BHF in cleanroom D-3 (KOH bench 6".) The BHF bath is positioned to the right. This is primarily used to remove oxide before and after a KOH etch.  
image:Stinkskab RR2.jpg|PP-bath: positioned in the upper right corner of the fumehood in cleanroom B-1. </gallery>
image:Stinkskab RR2.jpg|PP-bath: positioned in the upper right corner of the fumehood in cleanroom B-1. </gallery>
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Lithography/Baking"