Jump to content

Specific Process Knowledge/Lithography/Baking: Difference between revisions

← Older editNewer edit →
VisualWikitext
Taran (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891
3,527 edits
Taran (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891
3,527 edits
Line 163: Line 163:
<br clear="all" />
<br clear="all" />


<gallery caption="Different places to do wet silicon oxide etch" widths="220px" heights="225px" perrow="5">  
<gallery caption="Fumehood hotplates" widths="220px" heights="225px" perrow="5">  
image:BHF clean RR3.jpg|BHF clean in Cleanroom C-1. Wet silicon oxide etch bath positioned to the left in the bench.
image:BHF clean RR3.jpg|Fumehood hotplate for .
image:KOH_4tommer.jpg|BHF in cleanroom C-1 (KOH bench 1+2.) The BHF bath is positioned between the two KOH baths. This is primarily used to remove oxide before and after a KOH etch.  
image:KOH_4tommer.jpg|BHF in cleanroom C-1 (KOH bench 1+2.) The BHF bath is positioned between the two KOH baths. This is primarily used to remove oxide before and after a KOH etch.  
image:KOH3 RR4 1.JPG|BHF in cleanroom D-3 (KOH bench 6".) The BHF bath is positioned to the right. This is primarily used to remove oxide before and after a KOH etch.
image:KOH3 RR4 1.JPG|BHF in cleanroom D-3 (KOH bench 6".) The BHF bath is positioned to the right. This is primarily used to remove oxide before and after a KOH etch.  
image:BHF-PolySi-Al Etch.jpg|SIO etch bath (BHF with wetting agent) are positioned to the left in the bench in cleanroom D-3.  
image:Stinkskab RR2.jpg|PP-bath: positioned in the upper right corner of the fumehood in cleanroom B-1. </gallery>
image:Stinkskab RR2.jpg|PP-bath: positioned in the upper right corner of the fumehood in cleanroom B-1. </gallery>
<br clear="all" />
<br clear="all" />
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Lithography/Baking"