Specific Process Knowledge: Difference between revisions
| Line 350: | Line 350: | ||
! Transfer mask pattern to your sample | ! Transfer mask pattern to your sample | ||
|- | |- | ||
|Etch | !Entry page in LabAdviser | ||
!Techniques | |||
!Materials | |||
|- | |||
|[[Specific Process Knowledge/Etch| Etch]] | |||
| | |||
| | | | ||
|- | |- | ||
| | | | ||
|Wet etch | |Wet etch | ||
| | |||
|- | |- | ||
| | | | ||
|Dry etch | |Dry etch | ||
|Any material | |||
|- | |- | ||
|Lift-off | |Lift-off | ||
| | |||
| | | | ||
|- | |- | ||
Revision as of 13:32, 12 June 2014
Feedback to this page: click here
Choose the process topic you are interested in
The section below here is under construction 
Overview of sample processing
| Clean the sample File:Cleaning.jpg |
|---|
| Drying Samples File:Drying.jpg |
|---|
| Make a layer on the sample or Film Formation File:Making a layer 1.jpg | |
|---|---|
| Thermal Oxide growth | |
| Physical Vapour Deposition | |
| Sputter deposition | |
| Thermal deposition | |
| E-beam evaporation | |
| CVD | |
| LPCVD | |
| PECVD | |
| Coating | |
| Spin coating | |
| Spray coating | |
| Electroplating | |
| Epitaxial growth |
| Thermal treatment of the sample File:Thermal treatment 1.jpg |
|---|
Make a mask on the sample 
|
|---|
| Lithography |
| Imprinting |
| Transfer pattern into the sample |
|---|
| Wet etch |
| Dry etch |
| Lift-off |
| Direct structure definition |
|---|
| Imprinting |
| LASER machining |
| Lithographic definition |
| Polymer Injection molding |
| Bonding samples together |
|---|
| Characterize the sample |
|---|
| Back end of the sample |
|---|
| Chip/die mounting |
| Wire bonding |
| Dicing |
Overview of sample processing 2
|
|
|
|
| ||||||||||||||||||||||||||||||
|
|
|
| ||||||||||||||||||||||||||||||
|
|
Overview of sample processing 3
| Clean your sample |
|---|
| Drying your Samples |
|---|
| Create a layer/film on your sample | ||
|---|---|---|
| Entry page in LabAdviser | Techniques | Materials |
| Thermal Oxide growth | Furnaces | SiO2 |
| Thin film deposition | ||
| Sputter deposition | Si,SiO2,Si3N3,TiO2, metals | |
| Thermal evaporation | Al, ? | |
| E-beam evaporation | Metals | |
| LPCVD | Si3N4, SRN, SiO2, Si (poly and amorph) | |
| PECVD | Si3N4, SiO2, PBSG | |
| Electroplating | Ni | |
| Coating | ||
| Spin coating | resists, polymers | |
| Spray coating | resists, polymers | |
| Epitaxial growth | MOCVD | ? |
| Thermal treatment of your sample |
|---|
| Make a mask on your sample | |
|---|---|
| Entry page in LabAdviser | Techniques |
| Lithography | |
| Photolithography | |
| Deep UV lithography | |
| E-beam lithography | |
| Imprinting |
| Transfer mask pattern to your sample | ||
|---|---|---|
| Entry page in LabAdviser | Techniques | Materials |
| Etch | ||
| Wet etch | ||
| Dry etch | Any material | |
| Lift-off |
| Direct structure definition on your sample |
|---|
| Imprinting |
| LASER machining |
| Lithographic definition |
| Polymer Injection molding |
| Bonding your samples together |
|---|
| Characterize your sample |
|---|
| Back end processing of your sample |
|---|
| Chip/die mounting |
| Wire bonding |
| Dicing |