Jump to content

Specific Process Knowledge/Back-end processing/Laser Micromachining Tool/fluence: Difference between revisions

← Older editNewer edit →
VisualWikitext
Chasil (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab347-labadviser-users-35231
547 edits
Chasil (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab347-labadviser-users-35231
547 edits
Line 11: Line 11:
Where <math>\overline{P}</math> (average power) is measured with the laser sensor power measurement (see [http://labmanager.danchip.dtu.dk/d4Show.php?id=2885&mach=309|laser manual],section 5.3) and the repetion rate (<math>f</math>) is set in the parameter file under " laser frequency".
Where <math>\overline{P}</math> (average power) is measured with the laser sensor power measurement (see [http://labmanager.danchip.dtu.dk/d4Show.php?id=2885&mach=309|laser manual],section 5.3) and the repetion rate (<math>f</math>) is set in the parameter file under " laser frequency".


The fluence is therefore determinate as such :  
The fluence is therefore determinated as such :  




Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Back-end_processing/Laser_Micromachining_Tool/fluence"