Specific Process Knowledge/Lithography/Coaters/SprayCoater: Difference between revisions

@@ Line 8: / Line 8: @@
 Practically any sample that will fit inside the spray coater can be processed. Spray patterns are easily programmed either using predefined spray patterns (1D line, 2D rectangles/circles/meanders/spirals) or custom 3D spray patterns.
-The spray coating process as well as major features of the three nozzles are described into more detail in the manual which can be found via the Equipment Info page in LabManager. It can be found be clicking Equipment -> Info or by using the direct link below. Then follow the 'User Manual' link.
+The spray coating process as well as major features of the three nozzles are described into more detail in the manual which can be found via the Equipment Info page in LabManager under the Documents sections. The manual can also be found by clicking [http://labmanager.dtu.dk/d4Show.php?id=2523&mach=293 this direct link].
-'''The user manual, user APV, technical information and contact information can be found in LabManger''':
+'''Further information about the spray coater (current status, user manual, APV, technical information etc. can be found in LabManger''':
 [http://labmanager.danchip.dtu.dk/function.php?module=Machine&view=view&mach=293 Spray coater in LabManager]'''