|
|
| Line 7: |
Line 7: |
| *Wet oxide with O<sub>2</sub> and H<sub>2</sub> can be grown in furnace: A1, A3. | | *Wet oxide with O<sub>2</sub> and H<sub>2</sub> can be grown in furnace: A1, A3. |
| *Wet oxide with H<sub>2</sub>O in a bubbler can be grown in furnaces: C1, C3, D1, nobel. | | *Wet oxide with H<sub>2</sub>O in a bubbler can be grown in furnaces: C1, C3, D1, nobel. |
|
| |
| == Choose an equipment to use ==
| |
|
| |
| *[[/A1 Bor Drive-in furnace|Boron Drive-in + Predep furnace (A1)]] - ''For oxidation and annealing of Si wafesr, and for boron pre-deposition (doping) and for drive-in afterwards''
| |
| *[[/C2 Gate Oxide furnace|Gate Oxide furnace (A2)]] - ''For gate oxide growing on new wafers''
| |
| *[[/A3 Phosphor Drive-in furnace|Phosphorus Drive-in furnace (A3)]] - ''For oxidation and annealing of Si wafers and for drive-in after phosphorus pre-dep''
| |
| *[[/A4 Phosphor Pre-dep furnace|Phosphorus Predep furnace (A4)]] - ''For pre-deposition (doping) of phosphorus on Si wafers''
| |
| *[[/C1 Furnace Anneal-oxide|Anneal-oxide furnace(C1)]] - ''For oxidation and annealing of 100 mm and 150 mm wafers''
| |
| *[[/C3 Anneal-bond furnace|Anneal-bond furnace (C3)]] - ''For oxidation and annealing of bonded wafers''
| |
| *[[/C4 Aluminium Anneal furnace|Aluminium Anneal furnace (C4)]] - ''For oxidation and annealing of wafers containing aluminium''
| |
| *[[/Furnace Noble|Noble furnace]] - ''For annealing and oxidation of non-clean wafers''
| |
| *[[/Furnace APOX|APOX furnace]] - ''For growing of very thick oxide layers''
| |
| *[[/Jipelec RTP|Jipelec RTP]] - ''For rapid thermal annealing of III-V materials and Si based materials''
| |
| *[[/BCB Curing Oven|BCB Curing oven]] - ''For resist curing and metal alloying''
| |
| *[[/Resist Pyrolysis Furnace|Resist Pyrolysis furnace]] - ''For pyrolysis of different resist layers''
| |
|
| |
|
| ==Comparison of the six oxidation furnaces== | | ==Comparison of the six oxidation furnaces== |
