Specific Process Knowledge/Etch/Etching of Polymer: Difference between revisions

From LabAdviser
← Older edit
VisualWikitext
BGE (talk | contribs)
Bureaucrats, danchip, Administrators
2,908 edits
Rkch (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
271 edits
No edit summary
 
(39 intermediate revisions by 7 users not shown)
Line 1: Line 1:
=<span style="background:#FF2800">THIS PAGE IS UNDER CONSTRUCTION</span>[[image:Under_construction.png|200px]]=
'''Unless anything else is stated, everything on this page, text and pictures are made by DTU Nanolab.'''


'''All links to Kemibrug (SDS) and Labmanager Including APV and QC requires login.'''


= Polymer dry etching =
'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Etch/Etching_of_Polymer click here]'''
Upgrading the silicon etch capability at Danchip with the DRIE-Pegasus has pushed our old ASE (Advanced Silicon Etcher) out of the line so that it now only serves as backup silicon dry etcher. We have therefore decided that the ASE must be converted to a polymer etcher instead. Hence, it will join the plasma asher and to some extend the RIE's where polymer etching is allowed. In RIE1 it is only for removing photo resist before or after a RIE etch if the plasma asher cannot be used for some reason. On RIE2 you can get allowance for some other polymer etching but you have to ask first.
<!-- Replace "http://labadviser.Nanolab.dtu.dk/..." wih the link to the Labadviser page-->
 
<!--Page reviewed by jmli 9/8-2022  -->
*[[Specific Process Knowledge/Etch/Etching of Polymer/Etch of Photo Resist using RIE|Etch of Photo Resist using RIE]]
 
'''Feedback to this page''': '''[mailto:labadviser@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php?title=/... click here]'''
<!-- Replace "http://labadviser.danchip.dtu.dk/..." wih the link to the Labadviser page-->


<br clear="all" />
<br clear="all" />


== Etchning of Polymers ==
== Etching of Polymer ==


Stripping of polymers are often done by wet chemistry in a solvent that dissolves the given polymer. If wet chemistry cannot be used or a more controled etch of the polymer is needed a plasma system is used instead. Plasma ashers are design for removing polymers in primarily oxygen plasmas. It you need a more directional etch with a masking material RIE2 or ASE can be used.
Stripping of polymer is often done by wet chemistry in a solvent that dissolves the given polymer. If wet chemistry cannot be used or a more controlled etch of the polymer is needed a plasma system is used instead. Plasma ashers are designed for removing polymers in primarily oxygen plasmas. It you need a more directional etch with a masking material RIE2 or ASE can be used.


*[[/Polymer Etch by ASE|Polymer Etch by ASE]]
*[[/Polymer Etch by ASE|Polymer Etch by ASE]]
<!-- Link to the process info page in LabAdviser -->
<!-- Link to the process info page in LabAdviser -->


*[[/Deposition of silicon nitride using LPCVD|Process description using method 2]]
*[[Specific Process Knowledge/Lithography/Strip#Plasma_Asher_1|Plasma asher 1]]
<!-- Link to the process info page in LabAvdiser -->
<!-- Link to the process info page in LabAvdiser -->


*[[/Deposition of silicon nitride using LPCVD|Process description using method 1]]
*[[Specific Process Knowledge/Lithography/Strip#Plasma_Asher_2|Plasma asher 2]]


*[[/Etch of Photo Resist using RIE|Etch of Photo Resist using RIE]]


*[[/Deposition of silicon nitride using LPCVD|Process description using method 1]]




<br clear="all" />
<br clear="all" />


==Comparison method 1 and method 2 for the process==
==Comparison of methods for polymer etching==


{|border="1" cellspacing="1" cellpadding="3" style="text-align:left;"  
{|border="1" cellspacing="1" cellpadding="3" style="text-align:left;"  
Line 40: Line 35:
!
!
![[Specific Process Knowledge/Etch/ASE (Advanced Silicon Etch)|ASE]]
![[Specific Process Knowledge/Etch/ASE (Advanced Silicon Etch)|ASE]]
![[Specific Process Knowledge/Photolithography/Stripping equipment#Plasma_asher_1|Plasma asher 1]]
![[Specific Process Knowledge/Lithography/Strip#Plasma_Asher_1|Plasma asher 1]]
![[Specific Process Knowledge/Photolithography/Stripping equipment#Plasma_asher_2|Plasma asher 2]]
![[Specific Process Knowledge/Lithography/Strip#Plasma_Asher_2|Plasma asher 2]]
![[Specific Process Knowledge/Etch/RIE (Reactive Ion Etch)|RIE2]]
!Wet Polymer stripping
![[Specific Process Knowledge/Etch/Wet Polymer Etch|By wet etch]]
 
 
|-
|-


|-
|-
|-style="background:WhiteSmoke; color:black"
|-style="background:WhiteSmoke; color:black"
!Generel description
!General description
|Generel description - method 1
|The ASE was originally a dedicated deep Si etcher, but with the arrival of the Pegasus it has now been opened for polymer etching.
|Generel description - method 2
|The plasma asher is good for dry stripping polymers. It can also be used for descum and pattering of polymers. 
|Generel description - method 3
|The plasma asher is good for dry stripping polymers. It can also be used for descum and pattering of polymers. This plasma asher is for Si wafers without metals.
|Generel description - method 4
|Wet polymer etching is used for stripping a resist/polymer when it is no longer needed. E.g. removing resist masks.
|Generel description - method 5
 
|-
|-


|-
|-
|-style="background:LightGrey; color:black"
|-style="background:LightGrey; color:black"
!Parameter 1
!Etch direction
|
|
*A
Process dependent: <br>
*B
Isotropic to anisotropic (vertical to sample surface)
|
|
*A
Isotropic
*B
|
|
*A
Isotropic
*B
|
|
*A
Dissolves the polymer
*B
|
*A
*B
|-
|-


|-
|-
|-style="background:WhiteSmoke; color:black"
|-style="background:WhiteSmoke; color:black"
!Parameter 2
!Possible etch reactants
|
|
*A
*Oxygen plasma
*B
*Oxygen plasma mixed with
*C
**SF<sub>6</sub>
**CF<sub>4</sub>
**Ar
|
|
*A
*Oxygen plasma
*Oxygen plasma mixed with
**N<sub>2</sub>
**CF<sub>4</sub>
|
|
*A
*Oxygen plasma
*Oxygen plasma mixed with
**N<sub>2</sub>
|
|
*A
*The different solvents available at Nanolab, such as
|
**Acetone
*A
**1165 Remover
 
|-
|-


Line 101: Line 93:
!Substrate size
!Substrate size
|
|
*<nowiki>#</nowiki> small samples
*Samples smaller than 100 mm wafers must be glued to a 100 mm wafer or placed in a reces on a 100 mm wafer.
*<nowiki>#</nowiki> 50 mm wafers
*<nowiki>#</nowiki>1 100 mm wafer
*<nowiki>#</nowiki> 100 mm wafers
*<nowiki>#</nowiki>1 150 mm wafer (only when system is set up for 150 mm wafers)
*<nowiki>#</nowiki> 150 mm wafers  
|
|
*<nowiki>#</nowiki> small samples
*Several small samples
*<nowiki>#</nowiki> 50 mm wafers
*<nowiki>#</nowiki>25 50 mm wafers
*<nowiki>#</nowiki> 100 mm wafers
*<nowiki>#</nowiki>25 100 mm wafers
*<nowiki>#</nowiki> 150 mm wafers
*<nowiki>#</nowiki>25 150 mm wafer
|
|
*<nowiki>#</nowiki> small samples
*Several small samples
*<nowiki>#</nowiki> 50 mm wafers
*<nowiki>#</nowiki>25 50 mm wafers
*<nowiki>#</nowiki> 100 mm wafers
*<nowiki>#</nowiki>25 100 mm wafers
*<nowiki>#</nowiki> 150 mm wafers  
*<nowiki>#</nowiki>25 150 mm wafers  
|
|
*<nowiki>#</nowiki> small samples
*Any sample # and size that can go into the beaker used.
*<nowiki>#</nowiki> 50 mm wafers
*<nowiki>#</nowiki> 100 mm wafers
*<nowiki>#</nowiki> 150 mm wafers
|
*<nowiki>#</nowiki> small samples
*<nowiki>#</nowiki> 50 mm wafers
*<nowiki>#</nowiki> 100 mm wafers
*<nowiki>#</nowiki> 150 mm wafers
|-
|-


Line 131: Line 115:
!'''Allowed materials'''
!'''Allowed materials'''
|
|
*Allowed material 1
Silicon wafers with layers of
*Allowed material 2
*Silicon oxide or silicon (oxy)nitride
|
*Photoresist/e-beam resist
*Allowed material 1
*PolySilicon
*Allowed material 2
*Aluminium
*Allowed material 3
*Polymers (list?)
*Quartz/fused silica wafers
*Metals (no Pb and Te) max 5% wafer coverage
 
Polymer wafers?
|
|
*Allowed material 1
*Si, SiO2, Si3N4
*Allowed material 2
*Glass
*Metals (no Pb or Te)
*Resists, polymers
|
|
*Allowed material 1
*Si, SiO2, Si3N4
*Allowed material 2
*Glass
*Resists, polymers
|
|
*Allowed material 1
*Any material that may go into the beaker used.
*Allowed material 2
|-
|-
|}
|}


<br clear="all" />
<br clear="all" />

Latest revision as of 15:48, 6 February 2023

Unless anything else is stated, everything on this page, text and pictures are made by DTU Nanolab.

All links to Kemibrug (SDS) and Labmanager Including APV and QC requires login.

Feedback to this page: click here


Etching of Polymer

Stripping of polymer is often done by wet chemistry in a solvent that dissolves the given polymer. If wet chemistry cannot be used or a more controlled etch of the polymer is needed a plasma system is used instead. Plasma ashers are designed for removing polymers in primarily oxygen plasmas. It you need a more directional etch with a masking material RIE2 or ASE can be used.




Comparison of methods for polymer etching

ASE Plasma asher 1 Plasma asher 2 Wet Polymer stripping
General description The ASE was originally a dedicated deep Si etcher, but with the arrival of the Pegasus it has now been opened for polymer etching. The plasma asher is good for dry stripping polymers. It can also be used for descum and pattering of polymers. The plasma asher is good for dry stripping polymers. It can also be used for descum and pattering of polymers. This plasma asher is for Si wafers without metals. Wet polymer etching is used for stripping a resist/polymer when it is no longer needed. E.g. removing resist masks.
Etch direction

Process dependent:
Isotropic to anisotropic (vertical to sample surface)

Isotropic

Isotropic

Dissolves the polymer

Possible etch reactants
  • Oxygen plasma
  • Oxygen plasma mixed with
    • SF6
    • CF4
    • Ar
  • Oxygen plasma
  • Oxygen plasma mixed with
    • N2
    • CF4
  • Oxygen plasma
  • Oxygen plasma mixed with
    • N2
  • The different solvents available at Nanolab, such as
    • Acetone
    • 1165 Remover
Substrate size
  • Samples smaller than 100 mm wafers must be glued to a 100 mm wafer or placed in a reces on a 100 mm wafer.
  • #1 100 mm wafer
  • #1 150 mm wafer (only when system is set up for 150 mm wafers)
  • Several small samples
  • #25 50 mm wafers
  • #25 100 mm wafers
  • #25 150 mm wafer
  • Several small samples
  • #25 50 mm wafers
  • #25 100 mm wafers
  • #25 150 mm wafers
  • Any sample # and size that can go into the beaker used.
Allowed materials

Silicon wafers with layers of

  • Silicon oxide or silicon (oxy)nitride
  • Photoresist/e-beam resist
  • PolySilicon
  • Aluminium
  • Polymers (list?)
  • Quartz/fused silica wafers
  • Metals (no Pb and Te) max 5% wafer coverage

Polymer wafers?

  • Si, SiO2, Si3N4
  • Glass
  • Metals (no Pb or Te)
  • Resists, polymers
  • Si, SiO2, Si3N4
  • Glass
  • Resists, polymers
  • Any material that may go into the beaker used.


Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Etch/Etching_of_Polymer&oldid=44499"