Specific Process Knowledge/Lithography/Strip/resistStrip: Difference between revisions
Created page with "=Resist Strip= 400px|thumb|Resist strip bench in D-3 This resist strip is only for wafers without metal and SU-8. There are one Remover 1165 bath for stripping and one IPA bath for rinsing. '''Here are the main rules for resist strip use:''' *Place the wafers in a wafer holder and put them in the first bath for 10 min, this time is depending how much resist you have on the surface. *After the strip rinse your wafers in the IPA bath for 2-3..." |
No edit summary |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 2: | Line 2: | ||
[[Image:Resist_strip.jpg|400px|thumb|Resist strip bench in D-3]] | [[Image:Resist_strip.jpg|400px|thumb|Resist strip bench in D-3]] | ||
In the resist strip it is allowed to strip resist that is deposited on a metal layer. It is not allowed to strip resist with metal on top (lift off). Furthermore no SU-8 is allowed in the bath. | |||
There are one Remover 1165 bath for stripping and one IPA bath for rinsing. | There are one Remover 1165 bath for stripping and one IPA bath for rinsing. | ||
