Decommissioned Equipment: Difference between revisions
| (2 intermediate revisions by the same user not shown) | |||
| Line 7: | Line 7: | ||
* [[Specific Process Knowledge/Characterization/KLA-Tencor Surfscan 6420 | KLA-Tencor Surfscan 6420]] | * [[Specific Process Knowledge/Characterization/KLA-Tencor Surfscan 6420 | KLA-Tencor Surfscan 6420]] | ||
:(replaced by [[Specific Process Knowledge/Characterization/Particle Scanner Takano | Takano WM-7SR]]) | :(replaced by [[Specific Process Knowledge/Characterization/Particle Scanner Takano | Takano WM-7SR]]) | ||
*[[Specific Process Knowledge/Characterization/Profiler/Optical Profiler (Sensofar) acceptance test|Optical Profiler (Sensofar) acceptance test]] | |||
==Lithography Equipment== | ==Lithography Equipment== | ||
| Line 17: | Line 17: | ||
* Thin Film Deposition | * Thin Film Deposition | ||
:*[[Specific Process Knowledge/Thin film deposition/Deposition of AlTi/AlTi deposition in PVD co-sputter co-evaporation|AlTi deposition in PVD co-sputter co-evaporation]] | :*[[Specific Process Knowledge/Thin film deposition/Deposition of AlTi/AlTi deposition in PVD co-sputter co-evaporation|AlTi deposition in PVD co-sputter co-evaporation]] | ||
:*[[Specific Process Knowledge/Thin film deposition/Furnace LPCVD Nitride/Deposition of low stress nitride using the 4" LPCVD nitride furnace|Deposition of low stress nitride using the 4" LPCVD nitride furnace]] | |||
* Thermal Process | * Thermal Process | ||
| Line 38: | Line 39: | ||
*[[Specific Process Knowledge/Back-end processing/Polymer Injection Molder|Polymer Injection Molder]] | *[[Specific Process Knowledge/Back-end processing/Polymer Injection Molder|Polymer Injection Molder]] | ||
== | |||
==Delete Pages== | |||
Latest revision as of 21:17, 20 June 2025
List of Decommissioned Equipment
Below is a list of decommissioned equipment that is kept as reference for other Equipment.
Characterization Equipment
- (replaced by Takano WM-7SR)
Lithography Equipment
Thin Film Equipment
- Thin Film Deposition
- Thermal Process
- RTP Jipelec - For rapid thermal annealing of III-V materials and Si-based materials
- APOX furnace - For growing of very thick oxide layers
- III-V Oven (D4) - For oxidation of AlxGaAs layers.
- Old Resist Pyrolysis furnace - For pyrolysis of different resist
- Noble furnace - For annealing and oxidation of non-clean wafers
Dry Etch Equipment
Other Equipment