LabAdviser/314/Preparation 314-307/Soft-matter: Difference between revisions

← Older edit

VisualWikitext

@@ Line 3: / Line 3: @@
 ''This section is written by DTU Nanolab internal if nothing else is stated.''
-[[index.php?title=Category:314]]
+[[Category:314]]
-[[index.php?title=Category:314-Preparation]]
+[[Category:314-Preparation]]
 = Plunge Freezer =
@@ Line 239: / Line 239: @@
-[[File:Magnetic hotplate stirrer.jpeg|400px|thumb|left|VWR Magnetic hotplate stirrer Location at DTU Nanolab Building 314 Room 040]]<br clear="all" />
+[[File:Magnetic hotplate stirrer.jpeg|400px|thumb|left|VWR Magnetic hotplate stirrer Location at DTU Nanolab Building 307 Room 903]]<br clear="all" />
 For further information on the equipment usage contact mktracy@dtu.dk [https://www.dtu.dk/english/service/phonebook/person?id=141983&cpid=260636&tab=0].
@@ Line 300: / Line 300: @@
 == Ultrasonic cleaner ==
-The GT SONIC ultrasonic cleaner.
+The GT SONIC ultrasonic cleaner can be used to remove dirt, grease, corrosion or cleaning electronic and small mechanical parts. Millions of tiny bubbles are created when ultrasonic sound is passed through liquid. These tiny bubbles combined with a huge pressure create incredible cleaning results.
-The Ultrasonic Cleaner removes dirt, grease, corrosion and can be used for cleaning electronic and small mechanical parts. Millions of tiny bubbles are created when ultrasonic sound is passed through liquid. These tiny bubbles combined with a huge pressure create incredible cleaning results.This method of cleaning is particularly suited for cleaning difficult items such as instruments, tools, clock parts, airbrushes, printer heads, motors and more.
-Degas mode - This mode is to be used after a fluid change to rapidly remove air from the fluid so it can provide maximum cleaning effectiveness from the start of the cleaning cycle.
-Delicate mode - The cleaner runs at half power which provides a less aggressive cleaning action for fragile/delicate items.
-Full-power mode - A powerful deep clean that will clean heavily contaminated items.
-Temperature and Timing mode - Allows the user to set both the fluid temperature and duration of the cleaning cycle. These parameters will change depending on the cleaning agent and item being cleaned.
 Specifications:
@@ Line 317: / Line 309: @@
-[|400px|thumb|left|GT SONIC Ultrasonic cleaner Location at DTU Nanolab Building 307 Room 903]]<br clear="all" />
+Four modes are available on the intrument and are as follows:
+* '''Degas mode''' - This mode is to be used after a fluid change to rapidly remove air from the fluid so it can provide maximum cleaning effectiveness from the start of the cleaning cycle.
+* '''Delicate mode''' - The cleaner runs at half power which provides a less aggressive cleaning action for fragile/delicate items.
+* '''Full-power mode''' - A powerful deep clean that will clean heavily contaminated items.
+* '''Temperature and Timing mode''' - Allows the user to set both the fluid temperature and duration of the cleaning cycle. These parameters will change depending on the cleaning agent and item being cleaned.
+[[File:Ultrasonic cleaner.jpg|400px|thumb|left|GT SONIC Ultrasonic cleaner Location at DTU Nanolab Building 307 Room 903]]<br clear="all" />
 For further information on the equipment usage contact mktracy@dtu.dk [https://www.dtu.dk/english/service/phonebook/person?id=141983&cpid=260636&tab=0].