Latest revision as of 10:08, 17 September 2025

About DTU Nanolab

DTU Nanolab, the National Centre for Nano Fabrication and Characterization, in Denmark is located at the Technical University of Denmark (DTU). We provide access to a specially constructed facility for advanced electron microscopy and to 1500 m2 of cleanroom allowing state of the art processing to fabricate chips and devices for a large variety of applications. Our expertise is research based, with multiple research groups that focus on methods for imaging and characterization down to atomic resolution and on scalable nanofabrication technologies.

Address
DTU Nanolab
Ørsteds Plads - Building 347
DK-2800 Kongens Lyngby
Denmark

Tel.: +45 4525 5743
Email: info@nanolab.dtu.dk
Homepage: www.nanolab.dtu.dk

About LabAdviser

LabAdviser is a Wiki owned by DTU Nanolab for users of our facilities. It was created with the main purpose of sharing knowledge. It contains information about available equipment and fabrication processes in the cleanroom facilities in 346/347 and the characterisation equipment in building 307/314.

LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. We make every effort to provide reliable information but we provide no warranty as to the accuracy, reliability or completeness of the information found in LabAdviser.

If you are in doubt or if you have any questions, you are always welcome to contact us via nanolabsupport@nanolab.dtu.dk.

For LabAdviser-related comments or questions, please write to labadviser@nanolab.dtu.dk.

@@ Line 1: / Line 1: @@
-The purpose of LabAdviser is sharing of knowledge for scientific and educational use. Most of the material is specific for the instruments that are available in our laboratories and the main purpose with LabAdviser is share knowledge among your users and with the micro-/nanofabrication community. We also want to invite students from all over the world to use it to learn about state of the art nanofabrication and characterization. DTU Nanolab makes every effort to provide reliable information but DTU Nanolab provides no warranty as to the accuracy, reliability or completeness of the information found in this wiki.
+=About DTU Nanolab=
+DTU Nanolab, the National Centre for Nano Fabrication and Characterization, in Denmark is located at the Technical University of Denmark (DTU). We provide access to a specially constructed facility for advanced electron microscopy and to 1500 m2 of cleanroom allowing state of the art processing to fabricate chips and devices for a large variety of applications. Our expertise is research based, with multiple research groups that focus on methods for imaging and characterization down to atomic resolution and on scalable nanofabrication technologies.
-In our laboratories many experiments are being made and we want to support that the knowledge and experience acquired through this become accessible to current and future users. Sharing knowledge is the key for further development and all our users are encouraged to contribute. For the safety of the laboratory, however, we cannot allow LabAdviser to have an open-for-all-input structure like Wikipedia. We are however happy to receive contributions to LabAdviser from our users. We will decide whether it is relevant to add to this site. This can be done through a relevant employee or but writing to labadviser@nanolab.dtu.dk. We fit the material you send us into the wiki in a way that you can agree upon and so it is in agreement with our experience and with general rules in the DTU Nanolab laboratory facilities.
+'''Address'''<br>
+DTU Nanolab<br>
+Ørsteds Plads - Building 347<br>
+DK-2800 Kongens Lyngby<br>
+Denmark
-==Copyright==
+Tel.: +45 4525 5743<br>
-All material in LabAdviser has been cleared with the right-holders. For permission to share content from this site you need to ask permission from the relevant right-holder. I case the right-holder is DTU Nanolab then you can send a request for permission to labadviser@nanolab.dtu.dk.
+Email: [mailto:info@nanolab.dtu.dk info@nanolab.dtu.dk] <br>
+Homepage: [http://www.nanolab.dtu.dk www.nanolab.dtu.dk]
+=About LabAdviser=
+LabAdviser is a Wiki owned by DTU Nanolab for users of our facilities. It was created with the main purpose of sharing knowledge. It contains information about available equipment and fabrication processes in the cleanroom facilities in 346/347 and the characterisation equipment in building 307/314.
+LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. We make every effort to provide reliable information but we provide no warranty as to the accuracy, reliability or completeness of the information found in LabAdviser.
+If you are in doubt or if you have any questions, you are always welcome to contact us via [mailto:nanolabsupport@nanolab.dtu.dk nanolabsupport@nanolab.dtu.dk].
+For LabAdviser-related comments or questions, please write to [mailto:labadviser@nanolab.dtu.dk labadviser@nanolab.dtu.dk].