Latest revision as of 10:08, 17 September 2025

About DTU Nanolab

DTU Nanolab, the National Centre for Nano Fabrication and Characterization, in Denmark is located at the Technical University of Denmark (DTU). We provide access to a specially constructed facility for advanced electron microscopy and to 1500 m2 of cleanroom allowing state of the art processing to fabricate chips and devices for a large variety of applications. Our expertise is research based, with multiple research groups that focus on methods for imaging and characterization down to atomic resolution and on scalable nanofabrication technologies.

Address
DTU Nanolab
Ørsteds Plads - Building 347
DK-2800 Kongens Lyngby
Denmark

Tel.: +45 4525 5743
Email: info@nanolab.dtu.dk
Homepage: www.nanolab.dtu.dk

About LabAdviser

LabAdviser is a Wiki owned by DTU Nanolab for users of our facilities. It was created with the main purpose of sharing knowledge. It contains information about available equipment and fabrication processes in the cleanroom facilities in 346/347 and the characterisation equipment in building 307/314.

LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. We make every effort to provide reliable information but we provide no warranty as to the accuracy, reliability or completeness of the information found in LabAdviser.

If you are in doubt or if you have any questions, you are always welcome to contact us via nanolabsupport@nanolab.dtu.dk.

For LabAdviser-related comments or questions, please write to labadviser@nanolab.dtu.dk.

@@ Line 1: / Line 1: @@
-The purpose of LabAdviser is sharing of knowledge. In our laboratories thousands of experiments are being made and we want to make sure that the knowledge and experience acquired through this become accessible to current and future users. Sharing knowledge is the key for further development and all our users are encouraged to contribute. In time our users will hopefully be able to find good, relevant information about specific problems that they may encounter using the equipment in our facilities.
+=About DTU Nanolab=
+DTU Nanolab, the National Centre for Nano Fabrication and Characterization, in Denmark is located at the Technical University of Denmark (DTU). We provide access to a specially constructed facility for advanced electron microscopy and to 1500 m2 of cleanroom allowing state of the art processing to fabricate chips and devices for a large variety of applications. Our expertise is research based, with multiple research groups that focus on methods for imaging and characterization down to atomic resolution and on scalable nanofabrication technologies.
-DTU Nanolab makes every effort to provide reliable information but DTU Nanolab provides no warranty as to the accuracy, reliability or completeness of the information found in this wiki.
+'''Address'''<br>
+DTU Nanolab<br>
+Ørsteds Plads - Building 347<br>
+DK-2800 Kongens Lyngby<br>
+Denmark
-For the safety of the laboratory and other reasons, however, we cannot allow LabAdviser to have an open-for-all-input structure like Wikipedia.
+Tel.: +45 4525 5743<br>
+Email: [mailto:info@nanolab.dtu.dk info@nanolab.dtu.dk] <br>
+Homepage: [http://www.nanolab.dtu.dk www.nanolab.dtu.dk]
+=About LabAdviser=
+LabAdviser is a Wiki owned by DTU Nanolab for users of our facilities. It was created with the main purpose of sharing knowledge. It contains information about available equipment and fabrication processes in the cleanroom facilities in 346/347 and the characterisation equipment in building 307/314.
+LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. We make every effort to provide reliable information but we provide no warranty as to the accuracy, reliability or completeness of the information found in LabAdviser.
+If you are in doubt or if you have any questions, you are always welcome to contact us via [mailto:nanolabsupport@nanolab.dtu.dk nanolabsupport@nanolab.dtu.dk].
+For LabAdviser-related comments or questions, please write to [mailto:labadviser@nanolab.dtu.dk labadviser@nanolab.dtu.dk].