Specific Process Knowledge/Back-end processing/Laser Micromachining Tool/Lasers sources: Difference between revisions

Latest revision as of 08:52, 1 February 2023

Unless anything else is stated, everything on this page, text and pictures are made by DTU Nanolab.

Laser sources

The laser micromachining tool is equipped with two laser sources (1) a picosecond laser (TBW) and (2) a nanosecond laser (IPG). The technical specifications provided by the supplier 3D micromac are shown below. Refer to the Performances to know the measured values of the output power. From 1st of Mar 2017 only the pico second laser is available \ rkch.

Specifications from 3D micromac

	Picosecond (TBW)	Nanosecond (IPG)
Wavelength	1064nm, 532nm, 355nm	1064nm
Pulse duration	10ps	100ns
Repetition rate	200 kHz up to 8000 kHz software controlled	100kHz
Output power	> 50 W @ 1064 nm	100 W
Warm-up time	25min	none

Revision as of 10:06, 30 March 2021 view source Rkch (talk \| contribs) DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers 271 edits No edit summary ← Older edit		Latest revision as of 08:52, 1 February 2023 view source Sifkle (talk \| contribs) NLAB-Employees-701, NLAB-LabmanagerAllUsers 55 edits No edit summary
Line 1:		Line 1:

			'''Unless anything else is stated, everything on this page, text and pictures are made by DTU Nanolab.'''

	== Laser sources ==		== Laser sources ==