LabAdviser/Technology Research/Live TEM imaging nanowire growth: Difference between revisions
Created page with "=''Live TEM imaging of Nanowire growth and device dynamics''= *'''Project type:''' Ph.D project *'''Project responsible:''' Christopher Røhl Andersen *'''Supervisors:''' Kris..." |
mNo edit summary |
||
| Line 10: | Line 10: | ||
The microdevices are based on a microheater design ([https://doi.org/10.1002/smll.200800366]) and they are fabricated using silicon-on-insulator wafers. The device layer is made by using the maskless aligner at the DTU Nanolab cleanroom followed by a Bosch etching process. Windows are made from the handle using KOH etch and a thin nitride protection layer | The microdevices are based on a microheater design ([https://doi.org/10.1002/smll.200800366]) and they are fabricated using silicon-on-insulator wafers. The device layer is made by using the maskless aligner at the DTU Nanolab cleanroom followed by a Bosch etching process. Windows are made from the handle using KOH etch and a thin nitride protection layer | ||
Latest revision as of 18:06, 27 May 2025
Live TEM imaging of Nanowire growth and device dynamics
- Project type: Ph.D project
- Project responsible: Christopher Røhl Andersen
- Supervisors: Kristian Mølhave, Nika Akopian, Kimberly Dick Thelander
- Partners involved: DTU Photonics, NanoLund - Lund University
Project description
I fabricate microdevices at the Technical University of Denmark to study III-V nanowire growth and their electrical and optical properties using the ETEM at nCHREM, Lund University.
The microdevices are based on a microheater design ([1]) and they are fabricated using silicon-on-insulator wafers. The device layer is made by using the maskless aligner at the DTU Nanolab cleanroom followed by a Bosch etching process. Windows are made from the handle using KOH etch and a thin nitride protection layer