Specific Process Knowledge/Etch/IBE⁄IBSD Ionfab 300/IBE blazed gratings: Difference between revisions

From LabAdviser
← Older edit
VisualWikitext
Jmli (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
4,416 edits
No edit summary
Bghe (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, Bureaucrats, Administrators
7,018 edits
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Etch/IBE⁄IBSD_Ionfab_300/IBE_blazed_gratings click here]'''  
'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Etch/IBE⁄IBSD_Ionfab_300/IBE_blazed_gratings click here]'''  
<br> {{CC-bghe1}}
*60nm Barc
*60nm Barc
*360nm KRF resist
*360nm KRF resist


''by bge@nanolab'' experiments made in June/July 2012
''by bghe@nanolab'' experiments made in June/July 2012
<gallery caption="Some examples of blazed gratings in fused silica etched with Cr and DUV resist as masking layer "  widths="300px" heights="250px">
<gallery caption="Some examples of blazed gratings in fused silica etched with Cr and DUV resist as masking layer "  widths="300px" heights="250px">


Image:IBE 30min -Cr1.jpg |'''30min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3''' <br>*Rotation speed 0 rpm<br>*Angle: -35<br>*I(N)=400mA<br>*RF power=1300W<br>*I(B)=300mA<br>*V(B)=300V<br>*V(AC,B)=500V<br>*Ar(N) flow=5sccm<br>*Ar(B) flow=5sccm<br>*CHF3 flow=15sccm
Image:IBE 30min -Cr1.jpg |'''30 min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3''' <br>*Rotation speed 0 rpm<br>*Angle: -35<br>*I(N)=400mA<br>*RF power=1300W<br>*I(B)=300mA<br>*V(B)=300V<br>*V(AC,B)=500V<br>*Ar(N) flow=5sccm<br>*Ar(B) flow=5sccm<br>*CHF3 flow=15sccm
Image:after IBE 45min_A_34.jpg |'''45min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3''' <br>*Rotation speed 0 rpm<br>*Angle: -35<br>*I(N)=400mA<br>*RF power=1300W<br>*I(B)=300mA<br>*V(B)=300V<br>*V(AC,B)=500V<br>*Ar(N) flow=5sccm<br>*Ar(B) flow=5sccm<br>*CHF3 flow=15sccm
Image:after IBE 45min_A_34.jpg |'''45min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3''' <br>*Rotation speed 0 rpm<br>*Angle: -35<br>*I(N)=400mA<br>*RF power=1300W<br>*I(B)=300mA<br>*V(B)=300V<br>*V(AC,B)=500V<br>*Ar(N) flow=5sccm<br>*Ar(B) flow=5sccm<br>*CHF3 flow=15sccm
Image:Edge_1.jpg|'''20min etch with Krf resist, all resist is gone, used recipe BGHE blazed gratings''' <br>*Rotation speed 0 rpm<br>*Angle: -35<br>*I(N)=550mA<br>*RF power=1300W<br>*I(B)=500mA<br>*V(B)=600V<br>*V(AC,B)=400V<br>*Ar(N) flow=5sccm<br>*Ar(B) flow=10sccm<br>*CHF3 flow=0sccm
Image:Edge_1.jpg|'''20min etch with Krf resist, all resist is gone, used recipe BGHE blazed gratings''' <br>*Rotation speed 0 rpm<br>*Angle: -35<br>*I(N)=550mA<br>*RF power=1300W<br>*I(B)=500mA<br>*V(B)=600V<br>*V(AC,B)=400V<br>*Ar(N) flow=5sccm<br>*Ar(B) flow=10sccm<br>*CHF3 flow=0sccm

Latest revision as of 15:28, 6 February 2023

Feedback to this page: click here
This page is written by Berit Herstrøm @ DTU Nanolab (BGHE) if nothing else is stated

  • 60nm Barc
  • 360nm KRF resist

by bghe@nanolab experiments made in June/July 2012

  • Some examples of blazed gratings in fused silica etched with Cr and DUV resist as masking layer
  • 30 min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3 *Rotation speed 0 rpm *Angle: -35 *I(N)=400mA *RF power=1300W *I(B)=300mA *V(B)=300V *V(AC,B)=500V *Ar(N) flow=5sccm *Ar(B) flow=5sccm *CHF3 flow=15sccm
    30 min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3
    *Rotation speed 0 rpm
    *Angle: -35
    *I(N)=400mA
    *RF power=1300W
    *I(B)=300mA
    *V(B)=300V
    *V(AC,B)=500V
    *Ar(N) flow=5sccm
    *Ar(B) flow=5sccm
    *CHF3 flow=15sccm
  • 45min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3 *Rotation speed 0 rpm *Angle: -35 *I(N)=400mA *RF power=1300W *I(B)=300mA *V(B)=300V *V(AC,B)=500V *Ar(N) flow=5sccm *Ar(B) flow=5sccm *CHF3 flow=15sccm
    45min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3
    *Rotation speed 0 rpm
    *Angle: -35
    *I(N)=400mA
    *RF power=1300W
    *I(B)=300mA
    *V(B)=300V
    *V(AC,B)=500V
    *Ar(N) flow=5sccm
    *Ar(B) flow=5sccm
    *CHF3 flow=15sccm
  • 20min etch with Krf resist, all resist is gone, used recipe BGHE blazed gratings *Rotation speed 0 rpm *Angle: -35 *I(N)=550mA *RF power=1300W *I(B)=500mA *V(B)=600V *V(AC,B)=400V *Ar(N) flow=5sccm *Ar(B) flow=10sccm *CHF3 flow=0sccm
    20min etch with Krf resist, all resist is gone, used recipe BGHE blazed gratings
    *Rotation speed 0 rpm
    *Angle: -35
    *I(N)=550mA
    *RF power=1300W
    *I(B)=500mA
    *V(B)=600V
    *V(AC,B)=400V
    *Ar(N) flow=5sccm
    *Ar(B) flow=10sccm
    *CHF3 flow=0sccm
  • 15+30min etch with 50nm Cr mask, used recipe BGHE blazed gratings with CHF3 *Rotation speed 0 rpm *Angle: -35 *I(N)=400mA *RF power=1300W *I(B)=300mA *V(B)=300V *V(AC,B)=500V *Ar(N) flow=5sccm *Ar(B) flow=5sccm *CHF3 flow=15sccm
    15+30min etch with 50nm Cr mask, used recipe BGHE blazed gratings with CHF3
    *Rotation speed 0 rpm
    *Angle: -35
    *I(N)=400mA
    *RF power=1300W
    *I(B)=300mA
    *V(B)=300V
    *V(AC,B)=500V
    *Ar(N) flow=5sccm
    *Ar(B) flow=5sccm
    *CHF3 flow=15sccm
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Etch/IBE⁄IBSD_Ionfab_300/IBE_blazed_gratings&oldid=44476"