Specific Process Knowledge/Lithography/mrEBL6000: Difference between revisions
mNo edit summary |
|||
| (7 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
<br> | |||
mrEBL6000 works as a negative e-beam resist but is also UV sensitive, why resist and coated wafers should be kept in yellow rooms only. When carrying the wafers to the e-beam writer, use a black or blue box for protection. While mounting the wafers in the e-beam cassettes, you can turn off the white light in the e-beam room and turn on the yellow light which is located above the pre-aligner setup. Please mount as close to exposure as possible and turn of the with light outside the room and place a note on the door not to turn on light while the cassette is in the stocker. | |||
mrEBL6000 is a chemically amplified resist, i.e. immediately after e-beam exposure, the wafers require a post-exposure bake. If no post-exposure bake is performed, the resist is not crosslinked and will most likely dissolve during development. | |||
This resist can be used as standard negative resist at Nanolab, but due to limited use, we often need to buy a new bottle, hence please ask long time (up to 3 months) in advance for this chemical. or by it yourself! | |||
<br> | <br> | ||
<br> | <br> | ||
<br> | <br> | ||
== 3 week project on mrEBL6000 by William Tiddi == | == 3 week project on mrEBL6000 by William Tiddi == | ||
| Line 177: | Line 156: | ||
[[File:mrEBL_contrast.png|right|500px]] | [[File:mrEBL_contrast.png|right|500px]] | ||
<br> | |||
<br> | |||
[[File:mrEBL_doses6_33.png|left|600px]] | [[File:mrEBL_doses6_33.png|left|600px]] | ||