Specific Process Knowledge/Etch/Etching of Gold: Difference between revisions

From LabAdviser
← Older edit
VisualWikitext
Rkch (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
271 edits
No edit summary
 
(40 intermediate revisions by 9 users not shown)
Line 1: Line 1:
'''Unless anything else is stated, everything on this page, text and pictures are made by DTU Nanolab.'''
'''All links to Kemibrug (SDS) and Labmanager Including APV and QC requires login.'''
'''Feedback to this page''': '''[mailto:labadviser@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php/Specific_Process_Knowledge/Etch/Etching_of_Gold click here]'''
==Etching of Gold==
==Etching of Gold==
Etching of Gold is done wet at Danchip making your own set up in a beaker in the fumehood. We have two different solutions:


# Iodine etch: KI:I<math>_2</math>:H<math>_2</math>O - 100g:25g:500ml - standard at Danchip
Etching of Gold can be done either by wet etch, or by sputtering with ions.
# Aqua Regia (Kongevand): HNO<math>_3</math>:HCl - 1:3
*[[Specific Process Knowledge/Etch/Wet Gold Etch|Etching of Gold by wet etch]]
*[[Specific_Process_Knowledge/Etch/IBE&frasl;IBSD Ionfab 300/IBE Au etch|Sputtering of Au]]
<br clear="all" />


==Comparison of Gold Etch Methods==


===Comparing the two solutions===
{|border="1" cellspacing="1" cellpadding="3" style="text-align:left;"
|-


{| border="1" cellspacing="0" cellpadding="4" align="left"
!
! Iodine based gold etch
! Aqua Regia (Kongevand)
|-
|General description
|
Etch of pure Gold
|
Etch of pure Gold
|-
|-
|Chemical solution
|-style="background:silver; color:black"
|KJ:J<math>_2</math>:H<math>_2</math>O  (100g:25g:500ml)
!
|HCl:HNO<math>_3</math>  (3:1)
![[Specific Process Knowledge/Etch/Wet Gold Etch|Au wet etch 1]]
![[Specific Process Knowledge/Etch/Wet Gold Etch|Au wet etch 2]]
![[Specific_Process_Knowledge/Etch/IBE&frasl;IBSD Ionfab 300|IBE (Ionfab300+)]]
|-
|-
|Process temperature
|20 <sup>o</sup>C


|20 <sup>o</sup>C
|-
|-style="background:WhiteSmoke; color:black"
!Generel description
|Wet etch of Au using iodine based chemistry
|Wet etch of Au using Aqua Regina
|Sputtering of Au - pure physical etch
|-


|-
|-style="background:LightGrey; color:black"
!Etch rate range
|
*~100nm/min
|
*680 nm/min (dilute) or faster (concentrated). Mainly used for complete removal of metals
|
*~55nm/min (acceptance test)
|-
|-


|Possible masking materials:
|-
|-style="background:WhiteSmoke; color:black"
!Etch profile
|
|
Photoresist (1.5 µm AZ5214E)
*Isotropic
|
|
Unmasked - used as a stripper
*Isotropic
|
*Anisotropic (angles sidewalls, typical around 70 dg)
|-
|-
|Etch rate
 
|-style="background:LightGrey; color:black"
!Masking material
|
*Photoresist
|
|
~100 nm/min
*None (mainly used for stripping Au)
|
|
~(??) nm/min - fast etch
*Any material that is allowed in the chamber, photoresists included
|-
 
 
|-
|-
|Batch size
|-style="background:WhiteSmoke; color:black"
!Substrate size
|
*Any size and number that can go inside the beaker in use
|
|
1-25 wafers at a time
*Any size and number that can go inside the beaker in use
 
|
|
1-25 wafer at a time
Smaller pieces glued to carrier wafer
*<nowiki>#</nowiki>1 50mm wafer
*<nowiki>#</nowiki>1 100mm wafer
*<nowiki>#</nowiki>1 150mm wafer
*<nowiki>#</nowiki>1 200mm wafer
|-
 
|-
|-
|Size of substrate
|-style="background:LightGrey; color:black"
!'''Allowed materials'''
|
|
2-6" wafers
No restrictions cross contamination wise as long as you use the right beaker and make sure that they are safe to enter in the chemicals
|
|
2-6" wafers
No restrictions cross contamination wise as long as you use the right beaker and make sure that they are safe to enter in the chemicals
|
*Silicon
*Silicon oxides
*Silicon nitrides
*Metals from the +list
*Metals from the -list
*Alloys from the above list
*Stainless steel
*Glass
*III-V materials
*Resists
*Polymers
*Capton tape
|-
|-
|}

Latest revision as of 15:47, 6 February 2023

Unless anything else is stated, everything on this page, text and pictures are made by DTU Nanolab.

All links to Kemibrug (SDS) and Labmanager Including APV and QC requires login.

Feedback to this page: click here

Etching of Gold

Etching of Gold can be done either by wet etch, or by sputtering with ions.


Comparison of Gold Etch Methods

Au wet etch 1 Au wet etch 2 IBE (Ionfab300+)
Generel description Wet etch of Au using iodine based chemistry Wet etch of Au using Aqua Regina Sputtering of Au - pure physical etch
Etch rate range
  • ~100nm/min
  • 680 nm/min (dilute) or faster (concentrated). Mainly used for complete removal of metals
  • ~55nm/min (acceptance test)
Etch profile
  • Isotropic
  • Isotropic
  • Anisotropic (angles sidewalls, typical around 70 dg)
Masking material
  • Photoresist
  • None (mainly used for stripping Au)
  • Any material that is allowed in the chamber, photoresists included
Substrate size
  • Any size and number that can go inside the beaker in use
  • Any size and number that can go inside the beaker in use

Smaller pieces glued to carrier wafer

  • #1 50mm wafer
  • #1 100mm wafer
  • #1 150mm wafer
  • #1 200mm wafer
Allowed materials

No restrictions cross contamination wise as long as you use the right beaker and make sure that they are safe to enter in the chemicals

No restrictions cross contamination wise as long as you use the right beaker and make sure that they are safe to enter in the chemicals

  • Silicon
  • Silicon oxides
  • Silicon nitrides
  • Metals from the +list
  • Metals from the -list
  • Alloys from the above list
  • Stainless steel
  • Glass
  • III-V materials
  • Resists
  • Polymers
  • Capton tape
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Etch/Etching_of_Gold&oldid=44496"