Specific Process Knowledge/Lithography/EBeamLithography/HSQ Dose Test: Difference between revisions
mNo edit summary |
|||
| (12 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
<p style="color:red;"></p> | |||
= HSQ Dose Test = | |||
= Resist info = | = Resist info = | ||
| Line 9: | Line 13: | ||
** Optical and SEM images and analysis | ** Optical and SEM images and analysis | ||
= Results = | |||
Below is overview optical images of the developed pattern: | Below is overview optical images of the developed pattern: | ||
[[File:Dose test optical.png|frameless|625x625px|dose test optical images|left]] | [[File:Dose test optical.png|frameless|625x625px|dose test optical images|left]] | ||
<br clear=all> | |||
SEM images were recorded and analyzed from the structure shown below: The numbers indicate the line width and pitch. | |||
[[File:design.png|frameless|left|341x341px]] | |||
<br clear=all> | |||
SEM images were recorded and analyzed from the structure shown below: | |||
[[File:design.png|frameless| | |||
The measured and designed critical dimension are plotted vs the doses below: | The measured and designed critical dimension are plotted vs the doses below: | ||
[[File:CD vs dose.png|frameless| | [[File:CD vs dose.png|frameless|548x548px|dose test optical images|left]] | ||
<br clear=all> | |||
The line width roughness (LWR) is plotted vs CD below: | The line width roughness (LWR) is plotted vs CD below: | ||
[[File:LWR vs CD.png|frameless| | [[File:LWR vs CD.png|frameless|558x558px|dose test optical images|left]] | ||
Latest revision as of 11:24, 13 January 2026
HSQ Dose Test
Resist info
- we used a 10 % HSQ resist for a dose test. The resist info sheet could be found her.
- spinning: in labspin 3000rpm for 40s with 2s ramp (1500 acceleration) then bake for 2 min at 165 C
- Exposure: At 12nA ap6 (spot size 10 nm) in JEOL 9500
- Dose test with structures (3x3)
- Develop for 90s using manual TMAH developer
- Optical and SEM images and analysis
Results
Below is overview optical images of the developed pattern:
SEM images were recorded and analyzed from the structure shown below: The numbers indicate the line width and pitch.
The measured and designed critical dimension are plotted vs the doses below:
The line width roughness (LWR) is plotted vs CD below:
