LabAdviser/Safety: Difference between revisions

(17 intermediate revisions by 2 users not shown)

Line 1:

~~{{cc-~~nanolab}}

This page is currently under development. This content might be merged with information found on [https://www.nanolab.dtu.dk/access DTU Nanolabs webpage]. Until then it is supposed to explain the differen introductory courses. Schematics will follow.

~~ ~~

= Safety at DTU Nanolab =

At DTU Nanolab, we are interested in the safety of both, our employees and our users. As we are a multiuser facility, we need to establish working procedures to provide the best possible safety for our working environment. These are based on general safety procedures, EU regulations, and procedures we identify to be important for our working environment. Each user of our facility is expected to comply to these rules.

Line 8:

Line 6:

Before any user (academic or commercial) gets granted access to our labs, she/he needs to go through an introductory program. These programs will equip you with all the prerequisites required for accessing and engaging in safe practical work at DTU Nanolab. Please find more detailed information about the content, schedule, and how to sign up below or on https://www.nanolab.dtu.dk/access

For your own safety and the safety of other cleanroom users, we cannot admit anybody to the cleanroom who has insufficient English proficiency. Please contact [mailto:adm@nanolab.dtu.dk adm@nanolab.dtu.dk] or +45 ~~25 57 43~~ in case of questions.

For your own safety and the safety of other cleanroom users, we cannot admit anybody to the cleanroom who has insufficient English proficiency. Please contact [mailto:adm@nanolab.dtu.dk adm@nanolab.dtu.dk] or +45 4525 5743 in case of questions.

Line 32:

Line 30:

= Introductory Courses to Facilities at DTU Nanolab =

The extent of the training program depends on which facilities (and equipment) you would like to access. There are generally two main tracks you can follow to access equipment at DTU Nanolab. One track allows you to enter the cleanroom in building 346. The other track provides you with an introduction to facilities outside the cleanroom in building 346, 347, 314, or 307.

'''Equipment located in our cleanroom (building 346)'''

'''Equipment located in our cleanroom (building 346)'''

: https://www.nanolab.dtu.dk/access/cleanroom-access/introduction-course

''Please note that this course gives you access to the cleanroom and most other facilities in 346. For special labs, f.ex. the Wet Lab, you need to follow the other track to gain access.''

: ''Please note that this course gives you access to the cleanroom and most other facilities in 346. For special labs, f.ex. the Wet Lab, you need to follow the other track to gain access.''

'''3-week course students''' need to complete a shortened version of the cleanroom access course

Line 43:

'''Equipment or Facilities Outside the Cleanroom (building 307, 314, 346,or 347)'''

: For accessing '''Fabrication and Characterization Equipment located in building 346 or 347''', but outside the cleanroom, please sign up here:

~~For accessing '''Fabrication and Characterization Equipment located in building 346 or 347''', but outside the cleanroom, please sign up here~~:

:: https://www.nanolab.dtu.dk/access/other-facilities

: For accessing our '''Electron Beam Microscopy Equipment located in building 314 or 307''', please sign up here:

: https://www.nanolab.dtu.dk/access/other-facilities

For accessing our '''Electron Beam Microscopy Equipment located in building 314 or 307''', please sign up here:

~~: https://www.nanolab.dtu.dk/access/characterization~~

:: https://www.nanolab.dtu.dk/access/characterization

'''Returning user'''

: https://www.nanolab.dtu.dk/access/cleanroom-access/introduction-course

Returning users previously have either taken the "DTU Nanolab Introductory Course for 3-week students" or the "DTU Nanolab Introductory Course: Cleanroom in B346" but lost their access due to prolonged abscence from cleanroom work need to retake the full "DTU Nanolab Introductory Course: Cleanroom in B346" (including the practical part with one of our safety trainer) to be allowed to access the cleanroom unaccompanied.

: ''Returning users previously have either taken the "DTU Nanolab Introductory Course for 3-week students" or the "DTU Nanolab Introductory Course: Cleanroom in B346" but lost their access due to prolonged abscence from cleanroom work need to retake the full "DTU Nanolab Introductory Course: Cleanroom in B346" (including the practical part with one of our safety trainer) to be allowed to access the cleanroom unaccompanied.''

~~https://www.nanolab.dtu.dk/access/cleanroom-access/introduction-course~~

After registration for either program, our administration will add your information to our system. For access to our electron beam microscopy equipment, the [Mailto:microscopysupport@nanolab.dtu.dk|Microscopy Support Team] will assess your application and the responsible coordinator will contact you. For other equipment, you should receive an automatically generated email from DTU Nanolab with information regarding:

* Log-in data to DTU Learn and [https://labmanager.dtu.dk/ labmanger.dtu.dk]

Line 75:

Line 73:

== "DTU Nanolab Introductory Course: Cleanroom in B346" ==

This introductory course is mandatory for all users that want to access our cleanroom facilities ~~on their own~~. The course consists of an online part, a hands-on training and a final examination. You can sign up for the course at https://www.nanolab.dtu.dk/access/cleanroom-access.

This introductory course is mandatory for all users that want to access our cleanroom facilities independently. The course consists of an online part, a hands-on training and a final examination. You can sign up for the course at https://www.nanolab.dtu.dk/access/cleanroom-access.

After registration for either program, our administration will add your information to our system. You should receive an automatically generated email from DTU Nanolab with information regarding

Line 107:

Line 105:

This meeting can be held at any time after your registration, but especially for users new to nano- and microfabrication, a meeting at an earlier stage can help with establishing a working process flow. If you already have a fabrication plan or a preliminary process flow, please share it with us in advance so we can prepare accordingly.

Please note that while participation in the launch meeting is mandatory, formal approval of your process flow is not required. All users are expected to adhere strictly to the guidelines and equipment usage rules, with particular attention to preventing cross-contamination between tools. We are happy to assist you in reviewing and refining your process flow to help streamline your work and ensure compatibility with our facility standards. You can find more information on how to create a process flow [[~~LabAdviser~~/Process ~~flow approval~~|here]].

Please note that while participation in the launch meeting is mandatory, formal approval of your process flow is not required. All users are expected to adhere strictly to the guidelines and equipment usage rules, with particular attention to preventing cross-contamination between tools. We are happy to assist you in reviewing and refining your process flow to help streamline your work and ensure compatibility with our facility standards. You can find more information on how to create a process flow [[Specific Process Knowledge/Process Flow|here]].

If you have any questions or need further clarification, feel free to reach out at [mailto:training@nanolab.dtu.dk training@nanolab.dtu.dk].

Line 119:

Line 117:

== "DTU Nanolab Introductory Course for 3-week students" ==

This introductory course is mandatory for students that need to access our cleanroom facilities as part of a 3-week course. The course allows students to access the cleanroom attended by a DTU Nanolab staff member (or teacher of the 3-week course). The course is a slimmed-down version of the "DTU Nanolab Introductory Course: Cleanroom in B346" and consists of an online part (same as for "DTU Nanolab Introductory Course: Cleanroom in B346"), but a shortened hands-on part. You can sign up for the course at https://www.nanolab.dtu.dk/access/cleanroom-access/introduction-3-weeks-course.

Line 146:

Line 145:

~~ ~~This online introductory course is divided into several parts, the "mandatory study material and quiz" followed by a location-specific introduction.

This online introductory course is divided into several parts, the "mandatory study material and quiz" followed by a location-specific introduction.

'''Mandatory study material and quiz'''

Line 158:

Line 157:

* Introduction to [https://kemibrug.dk/ Kemibrug] (chemical database)

* Access agreement

After completing the mandatory part (including the access agreement), you can proceed to the location-specific parts of the introduction. There is no hands-on training connected to this first part. To register for specific facilities, please click on '''“Open the Checklist”''' (opens a new webpage). On this webpage you can select several locations. Please read the information on the check list carefully to be able to select the correct courses.

Once you selected all required parts, please return to the course on DTU Learn ("Introduction course for Nanolab facility (Not Cleanroom in B346)"). You will now find additional modules

for the selected facilities. Following locations are available.

After completing the mandatory part (including the access agreement), you can proceed to the location-specific parts of the introduction. There is no hands-on training connected to this first part. To register for specific facilities, please click on “Open the Checklist” (opens a new webpage). On this webpage you can select several locations. Please read the information on the check list carefully to be able to select the correct courses.

Once you selected all required parts, please return to the course on DTU Learn ("Introduction course for Nanolab facility (Not Cleanroom in B346)"). You will now find additional modules for the selected facilities. Following locations are available:

''Please note that some of these facilities are not Open Access labs and need permission from the relevant lab responsible! More information at https://www.nanolab.dtu.dk/access/other-facilities.''

Line 191:

Line 193:

'''Building 347 (PolyFabLab, SupportLab and Basement labs)'''

* General access to B347

* General access to B347 (including access to SupportLab)

Modules for work in specialized labs:

* Access to PolyFabLab cleanroom

* Access to SupportLab (Not available yet)

* Access to PDMS Lab

* Access to PDMS Lab ~~(Not available yet)~~

''Please note that you need to finish the "General access to B347" before you get access to the ~~other three parts~~.''

''Please note that you need to finish the "General access to B347" before you get access to modules for the specialized labs.''

If you have any question or issues regarding the safety courses offered at DTU Nanolab, please do not hesitate to contact [mailto:nanolabsupport@nanolab.dtu.dk nanolabsupport@nanolab.dtu.dk].