Jump to content

Specific Process Knowledge/Etch/DRIE-Pegasus/processB: Difference between revisions

← Older edit
VisualWikitext
Jml (talk | contribs)
Bureaucrats, danchip, Administrators
1,918 edits
Jmli (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
4,565 edits
No edit summary
 
(13 intermediate revisions by 2 users not shown)
Line 1: Line 1:
'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Etch/DRIE-Pegasus/processB click here]'''
<!--Checked for updates on 28/6-2023 - ok/jmli -->
<!--Checked for updates on 2/10-2020 - ok/jmli -->
<!--Checked for updates on 14/5-2018 - ok/jmli -->
<!--Checked for updates on 4/9-2025 - ok/jmli -->
{{contentbydryetch}}
== Process B ==
== Process B ==


Process B is labelled Via (30μm diameter) 100μm depth. In the acceptance test the process was run on a 150 mm SPTS wafer with 12-13 % etch load.
Process B was run on a 150 mm wafer with 12-13 % etch load.  


{| border="2" cellpadding="2" cellspacing="1" style="text-align:center;"
{| border="2" cellpadding="2" cellspacing="1" style="text-align:center;"
Line 93: Line 100:
=== Results ===
=== Results ===


A number of wafers are patterned with the [[Specific Process Knowledge/Photolithography/masks/travka|travka masks]] in 4 microns of AZ photoresist. The wafers are then etc
A number of wafers are patterned with the [[Specific Process Knowledge/Pattern Design/Travka|Travka mask set]] in 4 microns of AZ photoresist. The wafers are then etched using two different durations of process B in the DRIE-Pegasus.
 


{|
{|
Line 162: Line 168:
|}
|}
|}
|}
After etching each wafer is cleaved in two places: Both cleavage lines run across the [[Specific Process Knowledge/Pattern Design/Travka/fields/Aline|A-line fields]]. This produces three sites on each wafer where the depth of the trenches can be determined using an SEM.


<gallery caption="The results of process B after 17 and 34 cycles of etching"  widths="500" heights="350" perrow="2">
<gallery caption="The results of process B after 17 and 34 cycles of etching"  widths="500" heights="350" perrow="2">
image:Travkatesting1a.jpg|  
image:Travkatesting1a.jpg|
image:Travkatesting1b.jpg|The 60 nm trenches
image:Travkatesting1b.jpg|
</gallery>
</gallery>
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Etch/DRIE-Pegasus/processB"