Latest revision as of 21:08, 27 May 2025

The content on this page, including all images and pictures, was created by DTU Nanolab staff, unless otherwise stated.

Feedback to this page: click here

Dektak 3ST (Stylus Profiler) aka "III-V Profiler"

The Dektak 3ST is intended for profile measurements on samples outside the cleanroom. It is located in the basement, building 346, room 904.

The user manual, technical information and contact information can be found in LabManager.

The computer connected to the Dektak 3ST is pretty old and runs Windows 98 SE. It is not connected to the network but traces can be saved on either USB memory stick or floppy disk. The USB driver is an old universal driver and has been shown to work with small size USB sticks. However it did not work with an 8GB Kingston stick.

Performance and Process Parameters

Performance	Vertical Range	65 kÅ, 655 kÅ, 1310 kÅ
	Scan length range	50-50000 µm
	Stylus track force	Recommended: 3-10 mg, depending on the softness of the surface
	Scan speed ranges	High speed: 3s for 50µm to 50000µm Medium speed: 12s for 50µm to 10000µm Low speed: 50s
Materials	Allowed substrate materials	III-V Silicon polymer

@@ Line 2: / Line 2: @@
 '''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Characterization/Dektak_3ST click here]'''
+<br>
 <br>
 [[Category:Equipment|Characterization Profiler]]
 [[Category:Characterization|Profiler]]
-<br>
-== Dektak 3ST ==
+= Dektak 3ST (Stylus Profiler) aka "III-V Profiler"=
 [[image:III-V profiler.JPG|300x300px|right|thumb|The profiler placed in 346-904 (Dektak 3ST).]]
@@ Line 13: / Line 14: @@
-'''The user manual, technical information and contact information can be found in LabManager:'''
+The user manual, technical information and contact information can be found in [http://labmanager.danchip.dtu.dk/function.php?module=Machine&view=view&mach=184 LabManager].
-[http://labmanager.danchip.dtu.dk/function.php?module=Machine&view=view&mach=184 Dektak 3ST (Dektak) in LabManager]
 The computer connected to the Dektak 3ST is pretty old and runs Windows 98 SE. It is not connected to the network but traces can be saved on either USB memory stick or floppy disk. The USB driver is an old universal driver and has been shown to work with small size USB sticks. However it did not work with an 8GB Kingston stick.
+<br>
-===Equipment performance and process related parameters===
+<br>
+===Performance and Process Parameters===
 {| border="2" cellspacing="0" cellpadding="10"
 |-