Specific Process Knowledge/Back-end processing/Laser Micromachining Tool/fluence: Difference between revisions
mNo edit summary |
|||
| (3 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{cc-nanolab}} | |||
== Fluence definition == | == Fluence definition == | ||
| Line 11: | Line 14: | ||
Where <math>\overline{P}</math> (average power) is measured with the laser sensor power measurement (see [http://labmanager.danchip.dtu.dk/d4Show.php?id=2885&mach=309|laser manual],section 5.3) and the repetion rate (<math>f</math>) is set in the parameter file under " laser frequency". | Where <math>\overline{P}</math> (average power) is measured with the laser sensor power measurement (see [http://labmanager.danchip.dtu.dk/d4Show.php?id=2885&mach=309|laser manual],section 5.3) and the repetion rate (<math>f</math>) is set in the parameter file under " laser frequency". | ||
The fluence is therefore determinated as such : | The fluence is therefore determinated as such: | ||