Specific Process Knowledge/Etch/DRIE-Pegasus/nanobosch/nb-1.0: Difference between revisions

Latest revision as of 07:35, 4 April 2025

**Process conditions**
Substrate information	Wafer	S002872
	Substrate description	200 nm wide trenches with 400 nm pitch in Barc+stepper resist on quarter 6" wafer CB on oxide carrier
	Date	22/6-2012
	Tool	Pegasus
Process	Recipe	nb-1.0
	Tool conditioning	TDESC clean (?) then 30 second barc etch step before etch
	Process duration	3:45 minutes
	Purpose	test
	Characterisation	SEM Zeiss

**Process conditions**
Substrate information	Wafer	S003051
	Substrate description	200 nm wide trenches with 400 nm pitch in Barc+stepper resist on quarter 6" wafer CB on oxide carrier
	Date	11/9-2012
	Tool	Pegasus
Process	Recipe	nb-1.0
	Tool conditioning	TDESC clean (?) then 30 second barc etch step before etch
	Process duration	8:00 minutes or 60 cycles
	Purpose	Improved matching
	Characterisation	SEM Zeiss

**Process conditions**
Substrate information	Wafer	C01290.03
	Mask	2.2 µm AZ resist
	Date	21/9-2012
	Tool	Pegasus
Process	Run ID	C12090.03
	Tool conditioning	5 minute TDESC clean
	Mask description	Travka50 mask
	Purpose	See how the nb-1.0 behaves on AZ resist
	Characterisation	SEM Leo

@@ Line 1: / Line 1: @@
+<!--Checked for updates on 10/7-2019 - ok/jmli -->
 <!-- Ok, jmli 20170627 -->
 <!-- Ok, jmli 20170627 -->
+<!--Checked for updates on 24/8-2021. ok/ jmli-->
+<!--Checked for updates on 4/4-2025 - ok/jmli -->
 == Trial runs on HTF stepper wafers 22/6-2012 ==
 <!-- revised 1/6-2015 by jmli -->