Jump to content

Specific Process Knowledge/Etch/Etching of Titanium: Difference between revisions

VisualWikitext
BGE (talk | contribs)
Bureaucrats, danchip, Administrators
2,908 edits
New page: ==Etching of Aluminium== Etching of aluminium is done wet at Danchip. We have two different solutions: # H<math>_2</math>O:H<math>_3</math>PO<math>_4</math> 1:2 at 50 <sup>o</sup>C # Pre...
 
Mbec (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
194 edits
No edit summary
 
(44 intermediate revisions by 9 users not shown)
Line 1: Line 1:
==Etching of Aluminium==
'''Unless anything else is stated, everything on this page, text and pictures are made by DTU Nanolab.'''
Etching of aluminium is done wet at Danchip. We have two different solutions:


# H<math>_2</math>O:H<math>_3</math>PO<math>_4</math>  1:2 at 50 <sup>o</sup>C
'''All links to Kemibrug (SDS) and Labmanager Including APV and QC requires login.'''
# Pre-mixed etch solution: PES 77-19-04 at 20 <sup>o</sup>C


'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Etch/Etching_of_Titanium click here]'''
<!--Page reviewed by jmli 1/8-2016  -->
==Etching of Titanium==


===Comparing the two solutions===
Etching of titanium can be done either by wet etch, dry etch or by sputtering with ions.
*[[Specific Process Knowledge/Etch/Wet Titanium Etch|Etching of Ti by wet etch]]
*[[Specific Process Knowledge/Etch/ICP Metal Etcher/Titanium|Etching of Ti by dry etch]]
*[[Specific_Process_Knowledge/Etch/IBE&frasl;IBSD Ionfab 300/IBE Ti etch|Sputtering of Ti]]
<br clear="all" />
 
==Comparison of Titanium Etch Methodes==
 
{|border="1" cellspacing="1" cellpadding="3" style="text-align:left;"
|-


{| border="1" cellspacing="0" cellpadding="4" align="left"
!
! Aluminium Etch 1
! Aluminium Etch 2
|-
|General description
|
Etch of pure aluminium
|
Etch of aluminium + 1.5% Si
|-
|-
|Chemical solution
|-style="background:silver; color:black"
|H<math>_2</math>O:H<math>_3</math>PO<math>_4</math>  1:2
!
|PES 77-19-04
![[Specific Process Knowledge/Etch/Wet Titanium Etch|Ti wet etch 1]]
![[Specific Process Knowledge/Etch/Wet Titanium Etch|Ti wet etch 2]]
![[Specific_Process_Knowledge/Etch/ICP_Metal_Etcher|ICP metal]]
![[Specific_Process_Knowledge/Etch/IBE&frasl;IBSD Ionfab 300|IBE (Ionfab300+)]]
|-
|-
|Process temperature
|50 <sup>o</sup>C


|20 <sup>o</sup>C
|-
|-style="background:WhiteSmoke; color:black"
!Generel description
|BHF Etch of titanium with or without photoresist mask.
|Cold RCA1 mix etch of titanium (as stripper or with eagle resist).
|Dry plasma etch of Ti
|Sputtering of Ti - pure physical etch
|-


|-
|-style="background:LightGrey; color:black"
!Etch rate range
|
*~?nm/min
|
*~?nm/min
|
*~50-200 nm/min (depending on features size and etch load and recipe settings)
|
*~20nm/min
|-
|-


|Possible masking materials:
|-
|-style="background:WhiteSmoke; color:black"
!Etch profile
|
*Isotropic
|
*Isotropic
|
|
Photoresist (1.5 µm AZ5214E)
*Anisotropic (vertical sidewalls)
|
|
Photoresist (1.5 µm AZ5214E)
*Anisotropic (angles sidewalls, typical around 70 dg)
|-
 
 
|-
|-
|Etch rate
|-style="background:LightGrey; color:black"
!Substrate size
|
|
~100 nm/min (Pure Al)
*Any size and number that can go inside the beaker in use
|
|
~60(??) nm/min
*Any size and number that can go inside the beaker in use
|-
|Batch size
|
|
1-25 wafers at a time
*smaller pieces on a carrier wafer
*<nowiki>#</nowiki>1 100mm wafers (if you place it/bond it on a 150 mm carrier wafer)
*<nowiki>#</nowiki>1 150mm wafers
|
|
1-25 wafer at a time
Smaller pieces glued to carrier wafer
*<nowiki>#</nowiki>1 50mm wafer
*<nowiki>#</nowiki>1 100mm wafer
*<nowiki>#</nowiki>1 150mm wafer
*<nowiki>#</nowiki>1 200mm wafer
|-
|-
|Size of substrate
 
|-
|-style="background:WhiteSmoke; color:black"
!'''Allowed materials'''
|
|
4" wafers
No restrictions cross contamination wise as long as you use the right beaker and make sure that they are safe to enter in the chemicals
|
|
4" wafers
No restrictions cross contamination wise as long as you use the right beaker and make sure that they are safe to enter in the chemicals
|-
|Allowed materials
|
|
*Silicon
*Quartz/fused silica
*Photoresist/e-beam resist
*PolySilicon,
*Silicon oxide
*Silicon (oxy)nitride
*Aluminium
*Aluminium
*Silicon
*Titanium
*Silicon Oxide
*Chromium
*Silicon Nitride
*Silicon Oxynitride
*Photoresist
*E-beam resist
|
|
*Aluminium
*Silicon
*Silicon
*Silicon oxides
*Silicon Oxide
*Silicon nitrides
*Silicon Nitride
*Metals from the +list
*Silicon Oxynitride
*Metals from the -list
*Photoresist
*Alloys from the above list
*E-beam resist
*Stainless steel
*Glass
*III-V materials
*Resists
*Polymers
*Capton tape
|-
|-
|}
|}
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Etch/Etching_of_Titanium"